DOCUMENT:Q259149 08-DEC-2000 [sna] TITLE :SNA Server Selects Bad Dependent APPC LU from Default Pool PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:4.0,4.0 SP1,4.0 SP2,4.0 SP3 OPER/SYS: KEYWORDS:kbSNA400sp4fix kbSNA400PreSP4fix ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3 ------------------------------------------------------------------------------- SYMPTOMS ======== If multiple dependent local APPC LUs are configured with the Member of default outgoing local APPC LU pool check box enabled, and an APPC or CPIC application specifies a blank Local LU alias when it attempts to allocate a conversation to a Remote APPC LU, the SNA Server computer may fail to locate an available local LU and reject the Allocate request. When this occurs, the SNA Server computer selects a local LU that is already being used, instead of choosing an available local APPC LU in the pool. If this occurs with an APPC application, the [MC_]ALLOCATE fails with the following error message: primary_rc = 0x0003 (AP_ALLOCATION_ERROR) secondary_rc = 0x00000005 (AP_ALLOCATION_FAILURE_RETRY) A CPIC application fails with the following error message: rc = 20 (CM_PRODUCT_SPECIFIC_ERROR) This problem can occur when the dependent local APPC LU pool is used to access a single Remote APPC LU, or multiple Remote APPC LUs. NOTE: There are other causes for these failures other that this specific problem. For example, if the host rejects the INITSELF request to activate a session, or there is a problem with the connection, these error messages may also occur. Also, when the Default pool check box is selected on a local APPC LU, the LU may be used to access any remote APPC LU if a blank local LU alias is provided by the APPC application. Therefore, the remote APPC LU (on the remote system) must be enabled to support sessions from any pooled local APPC LU. CAUSE ===== When opening a pooled-dependent local APPC LU, the SNA Server incorrectly selects an LU that - has not fully completed the session activation process due to an allocate request by a different user (for example, waiting for an LUSTAT reply) - is already in session with a different Remote APPC LU - has been deactivated by a DACTLU command and has not received a new ACTLU RESOLUTION ========== To resolve this problem, obtain the latest service pack for SNA Server 4.0. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: Q215838 How to Obtain the Latest SNA Server Version 4.0 Service Pack STATUS ====== Microsoft has confirmed that this is a problem in Microsoft SNA Server version 4.0, 4.0 SP1, 4.0 SP2 and 4.0 SP3. This problem was first corrected in SNA Server 4.0 Service Pack 4. Additional query words: ====================================================================== Keywords : kbSNA400sp4fix kbSNA400PreSP4fix Technology : kbAudDeveloper kbSNAServSearch kbSNAServ400 kbSNAServ400SP1 kbSNAServ400SP2 kbSNAServ400SP3 Version : WINDOWS:4.0,4.0 SP1,4.0 SP2,4.0 SP3 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.