DOCUMENT:Q258981  10-NOV-2000  [sna]
TITLE   :Error When You Add LU to Connection and Pool by Using Snacfg.exe
PRODUCT :Microsoft SNA Server
PROD/VER::4.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft SNA Server, version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you add a logical unit (LU) by using the Snacfg.exe file with a command
file that does not end with a carriage return and line feed pair (CR/LF), you
may receive the following error message:

   There is already an LU with this LU Number.

WORKAROUND
==========

You can work around this problem by ensuring that the command file ends in a
carriage return and line feed pair.

MORE INFORMATION
================

Steps to Reproduce the Problem
------------------------------

1. Create a file that is named Job4.txt, and use the following 20 lines as the
   text in the file:

   

   LUA PALURD03 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:2
   LUA PALURD04 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:3
   LUA PALURD05 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:4
   LUA PALURD06 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:5
   LUA PALURE03 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:6
   LUA PALURE04 /ADD /CONNECTION:APUPOSC1 /POOL:ALURD03 /LUNUMBER:7
   LUA PALURE05 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:8
   LUA PALURE06 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:9
   LUA PALURG03 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:10
   LUA PALURG04 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:11
   LUA PALURG05 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:12
   LUA PALURG06 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:13
   LUA PALURH03 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:14
   LUA PALURH04 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:15
   LUA PALURH05 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:16
   LUA PALURH06 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:17
   LUA PALURI03 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:18
   LUA PALURI04 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:19
   LUA PALURI05 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:20
   LUA PALURI06 /ADD /CONNECTION:APUPOSC1 /POOL:ALURd03 /LUNUMBER:21

   Make sure that the last line does not end with a carriage return and line feed
   pair.

2. Create a connection that is named APUPOSC1.

3. Create an LUA pool that is named ALURD03.

4. Save your changes in SNA Server Manager.

5. Type the following at a command prompt:

   "snacfg PATH\@job4.txt /v" (without the quotation marks)

   Be sure to use the proper path for the command file.

You receive the following error message:

   Line no 20: Processing command to add LUA PALURI06
   Assigning LU PALURI06 to connection APUPOSC1
   There is already an LU with this LU Number.
   Command failed

Additional query words:

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ400
Version           : :4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.