DOCUMENT:Q243972 21-OCT-1999 [sna] TITLE :SDLC Connection with MicroGate MGT1 Adapter Remains Pending PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:2.11,3.0,4.0 OPER/SYS: KEYWORDS:_IK sna4 ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 2.11, 3.0, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== An SDLC connection configured to use the MicroGate T1 SDLC Adapter from MicroGate Corp. may stay in pending status. CAUSE ===== The incorrect interface (RS232, RS422, or V.35) may have been selected on the adapter. RESOLUTION ========== Set the J5, J6, or J7 jumper to the correct interface type. MORE INFORMATION ================ There are three jumper settings that correlate to the types of interface. The J5 jumper selects RS-232, J6 selects V.35, and J7 selects RS-422. RS-232 is generally associated with analog modems at 2400 to 19.2 baud, V.35 is a digital interface using CSU/DSUs (Channel Service Unit/Data Service Unit) at 56 kb per second or greater, and RS-422 is a differential standard using a DB-25 connector. It is most frequently used in Europe. Other SDLC adapters, such as the Attachmate Corp. (formerly DCA) ISCA Adapter, may have similar configuration settings. The third-party products discussed in this article are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability. Additional query words: ====================================================================== Keywords : _IK sna4 Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211 kbSNAServ400 Version : WINDOWS:2.11,3.0,4.0 Issue type : kbinfo ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 1999.