DOCUMENT:Q242109 08-AUG-2001 [winnt] TITLE :Slow Logging On and Browsing the Network Using IPX/SPX PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you try to log on to or browse the network from a Microsoft Windows 95-based or Microsoft Windows NT 4.0-based computer that uses only the IPX/SPX protocol, you may experience delays. Also, programs that run on the IPX/SPX-based network may time out. CAUSE ===== This behavior can occur if an internal network number is set on a server running Windows NT, but there is no NetWare server on the network. RESOLUTION ========== To resolve this issue, manually configure the frame type and external network number on both the server and client computers: NOTE: A Windows NT Server 4.0-based server typically does not require an internal network number when there is no NetWare server on the network. 1. In Control Panel, double-click Network, and then click the Protocols tab. 2. Click NWLink IPX/SPX-Compatible Transport, and then click Properties. 3. On the General tab, click the network adapter in the Adapter box. 4. Click Manual Frame Type Detection, and then click Add. 5. Click the frame type in the list, and then type the network number in the Network Number box. 6. Click Add, and then click OK. 7. Restart the computer. MORE INFORMATION ================ The IPX network number, sometimes referred to as the 'external network number', is used to define the segments on your network. An IPX network number must be configured for each frame type on each network adapter installed in your Windows NT 4.0-based computer. The network number must be unique for each network segment. All computers on the same network segment using the same frame type must use the same network number to communicate. An internal network number identifies a virtual network segment on your network. Novell NetWare servers typically use internal network numbers to create a logical network to help identify the server in a multiple IPX/SPX-based network environment. By default, the internal network number is set to 0 on a Windows NT Server 4.0-based server and is not used in IPX routing. To use an internal network number on a Windows NT Server 4.0-based server, you must manually set the internal network number to a non-zero value (the internal network number is not automatically detected). A Windows NT Server 4.0-based computer requires an internal network number only when the following conditions apply: - Your computer is running File and Print Service for NetWare (FPNW) - Multiple frame types are in use on a single network adapter - NWLink is bound to multiple network adapters on your Windows NT Server 4.0-based computer - Your server is running programs that use the IPX/SPX Service Advertising Protocol (SAP), such as Microsoft SQL Server or Microsoft System Network Architecture (SNA) Server. For more information about the NWLink protocol and network numbers, refer to the following articles in the Microsoft Knowledge Base: Q150546 NWLink IPX/SPX: Network Number vs. Internal Network Number Q203051 Description of Microsoft NWLink IPX/SPX-Compatible Transport Additional query words: nt 4.0 slow log in netware ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : winnt:4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.