DOCUMENT:Q193838 09-AUG-2001 [winnt] TITLE :DNS Zone Transfer Fails from WinNT Server to UNIX DNS Server PRODUCT :Microsoft Windows NT PROD/VER:WinNT:4.0 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When transferring a primary zone from a Microsoft Windows NT 4.0 DNS server to a secondary zone on a UNIX DNS server, the zone transfer may fail if the Windows NT DNS zone is configured for WINS lookup or WINS Reverse Lookup. CAUSE ===== The Microsoft DNS server may have a WINS or WINS-R (NBTSTAT) record included in the DNS file, which is not understood by UNIX DNS. This may cause the zone transfer to fail when the UNIX DNS server reaches the record in the transfer. The WINS record is the result of configuring WINS Lookup for a zone. The WINS-R (NBTSTAT) record is the result of configuring WINS Reverse Lookup for a reverse lookup zone. RESOLUTION ========== There is an additional flag that can be set for the WINS and WINS-R (NBTSTAT) records in the zone transfer file that allow better interoperability with a UNIX DNS server. To avoid sending the WINS or WINS-R (NBTSTAT) records to DNS servers that do not have the WINS or WINS-R capability, configure the zone properties to specify "Settings only affect local server." The "Settings only affect local server" configuration will insert the LOCAL flag immediately after the WINS or WINS-R (NBTSTAT) record. For example: @ 0 IN WINS LOCAL 1.1.1.1 1.1.1.2 @ 0 IN WINS-R LOCAL domainname.com On the primary Microsoft NT DNS server, the LOCAL flag keeps the record from being sent in a zone transfer. To configure "Settings only affect local server" for a zone that uses WINS Lookup, perform the following steps: 1. Select the zone and right-click it. 2. Click Properties. 3. Click the WINS Lookup tab. 4. Click to select the "Settings only affect local server" check box. 5. Click OK. 6. Click the DNS menu. 7. Click Update Server Data Files. To configure "Settings only affect local server" for a zone that uses WINS Reverse Lookup, perform the following steps: 1. Select the reverse lookup zone and right-click it. 2. Click Properties. 3. Click the WINS Reverse Lookup tab. 4. Click to select the "Settings only affect local server" check box. 5. Click OK. 6. Click the DNS menu. 7. Click Update Server Data Files. ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : WinNT:4.0 Issue type : kbprb ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.