DOCUMENT:Q186873  09-AUG-2001  [winnt]
TITLE   :Netbios Delays Sending/Receiving Packets When Session Is Lost
PRODUCT :Microsoft Windows NT
PROD/VER:WinNT:4.0
OPER/SYS:
KEYWORDS:kbWinNT400sp4fix

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 4.0 
 - Microsoft Windows NT Server version 4.0, Terminal Server Edition 
-------------------------------------------------------------------------------

SYMPTOMS
========

On a network running NetBIOS over TCP/IP, you may notice that, if a client's
connection to a Windows NT server fails or experiences a loss of session, this
causes delays in sending or receiving data from other clients to and from the
server.

CAUSE
=====

During a failed or disconnected client session to the server, you may notice,
using Network Monitor, that you can see the server is receiving packets from the
other clients; however, NetBIOS is not passing packets back up to the clients.
This will also show that all the send buffers have been consumed and they are
waiting for the server to respond (this is with a low level NetBIOS ACK, not a
NetBIOS packet). The Network Monitor trace shows that TCP/IP has already ACK'd
these packets but the NetBIOS layer has not.

It will appear that the NetBIOS layer is blocked, waiting for something just
after the lower level protocol has notified it of a session failure.

NOTE: The problem does not occur until TCP/IP sees that there is a timeout.

When in this state, the NetBIOS interface will not process any command. Even
simple commands like Adapter Status will be blocked. You may pass any NO_WAIT
commands to NetBIOS; however, these will not be processed until it recovers.

RESOLUTION
==========

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or
Windows NT Server 4.0, Terminal Server Edition. For additional information,
please see the following article in the Microsoft Knowledge Base:

   Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack


STATUS
======

Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT
Server 4.0, Terminal Server Edition. This problem was first corrected in Windows
NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition
Service Pack 4.


======================================================================
Keywords          : kbWinNT400sp4fix 
Technology        : kbWinNTsearch kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch
Version           : WinNT:4.0
Hardware          : ALPHA x86
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.