DOCUMENT:Q182739  10-AUG-2001  [winnt]
TITLE   :Lock Workstation Button Still Functions After Being Disabled
PRODUCT :Microsoft Windows NT
PROD/VER:WINNT:4.0
OPER/SYS:
KEYWORDS:kb3rdparty kbenv

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

After you disable the Lock Workstation button in the Windows NT Security dialog
box, the Lock Workstation button may still function normally.

CAUSE
=====

This behavior can occur if the Novell IntraNetWare client version 4.11a for
Windows NT is installed.

RESOLUTION
==========

To resolve this issue, remove the Novell IntraNetWare client, and install the
Microsoft Client Service for NetWare. To do so, follow these steps:

1. Click Start, point to Settings, and then double-click Network.

2. On the Services tab, click the Novell IntraNetWare client in the Network
   Services box, and then click Remove.

3. Click Add.

4. In the Network Services box, click Client Service For NetWare, and then click
   OK.

5. Click OK.

6. When you are prompted to restart the computer, do so.

MORE INFORMATION
================

For additional information, see the following articles in the Microsoft
Knowledge Base:

   ARTICLE-ID: Q174840
   TITLE : Disabling Buttons in the Windows NT Security Dialog Box

   ARTICLE-ID: Q172124
   TITLE : Poledit.exe Not Updated During WinNT SP3 Installation

Additional query words: disabled locked buttons

======================================================================
Keywords          : kb3rdparty kbenv 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search
Version           : WINNT:4.0
Issue type        : kbbug
Solution Type     : kbnofix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.