DOCUMENT:Q181022  07-SEP-2001  [winnt]
TITLE   :Err: Cannot Write to LPTx Printing to Parallel Port
PRODUCT :Microsoft Windows NT
PROD/VER:WinNT:4.0
OPER/SYS:
KEYWORDS:kbprint kbWinNT400sp4fix

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation version 4.0 
 - Microsoft Windows NT Server version 4.0 
 - Microsoft Windows NT Server version 4.0, Terminal Server Edition 
-------------------------------------------------------------------------------


IMPORTANT: This article contains information about editing the registry.
Before you edit the registry, make sure you understand how to restore it if
a problem occurs. For information on how to do this, view the "Restoring
the Registry" online Help topic in Regedit.exe or the "Restoring a Registry
Key" online Help topic in Regedt32.exe.

SYMPTOMS
========

When you print to a parallel port on a computer running Windows NT, one of the
following may occur:

 - After you clear a paper outage or jam on the printer and click OK on the
   following error message, the same error may reappear until Windows NT is
   shutdown and restarted:

   Cannot write to LPTx

   where x is the LPT port number.

 - On host-based printers, the printer does not reset properly if you shutdown
   and restart Windows NT without first actually powering off the computer.

 - When you print with an older parallel port printer, the output has invalid,
   garbled, or missing characters or nothing prints.

CAUSE
=====

The first two symptoms above are caused by the local port monitor resetting
faster than the port can become ready. The printer driver then interprets that
the printer is properly reset, which is not the case.



The third symptom happens because the centronics handshake in Parallel.sys is too
aggressive for some older devices.

RESOLUTION
==========

To do a slower handshake to older/slower printers, the following registry entry
must be added.

WARNING: Using Registry Editor incorrectly can cause serious problems that may
require you to reinstall your operating system. Microsoft cannot guarantee that
problems resulting from the incorrect use of Registry Editor can be solved. Use
Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys And
Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete
Information in the Registry" and "Edit Registry Data" Help topics in
Regedt32.exe. Note that you should back up the registry before you edit it. If
you are running Windows NT, you should also update your Emergency Repair Disk
(ERD).

The registry entry to enable this feature is

\HKLM\SYSTEM\CurrentControlSet\Services\Parallel\Parameters

and is a DWORD value "UsePIWriteLoop", which needs to be set to 1.

Be aware that enabling this entry will slow down ALL parallel ports.

To resolve this problem, obtain the latest service pack for Windows NT 4.0 or
Windows NT Server 4.0, Terminal Server Edition. For additional information,
please see the following article in the Microsoft Knowledge Base:

   Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack


For your convenience, the English version of this post-SP3 hotfix has been posted
to the following Internet location. However, Microsoft recommends that you
install Windows NT 4.0 Service Pack 4 to correct this problem.

   ftp://ftp.microsoft.com/bussys/winnt/winnt-public/fixes/usa/NT40/hotfixes-postSP3/prnt-fix/

STATUS
======

Microsoft has confirmed this to be a problem in Windows NT 4.0 and Windows NT
Server 4.0, Terminal Server Edition. This problem was first corrected in Windows
NT 4.0 Service Pack 4.0 and Windows NT Server 4.0, Terminal Server Edition
Service Pack 4.


Additional query words: lpt1 lpt2
======================================================================
Keywords          : kbprint kbWinNT400sp4fix 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch
Version           : WinNT:4.0
Hardware          : ALPHA x86
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.