DOCUMENT:Q177899 13-JUN-2001 [sna] TITLE :Dependent LU6.2 Bind Rejected with Sense Code 0835 PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 OPER/SYS: KEYWORDS:kbbuglist ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 3.0, 3.0 SP1, 3.0 SP2, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== SNA Server 3.0 (including SP1 or SP2) and 4.0 may reject a dependent APPC LU Bind that is sent by the host. This causes a session activation error and the following entry is made to the Microsoft Windows NT event log: Event: 17 Description: APPC session activation failure: BIND negative response sent Sense Data = 083500xx NOTE: The xx bytes in the sense code point to the hexadecimal offset within the host bind request of the parameter that SNA Server is rejecting. In this case, the xx may point to a PLU name which may not be prepended with the network name. CAUSE ===== The host system starts an LU6.2 dependent session by sending a BIND to SNA Server. If the Primary LU Name (PLU) sent in the BIND request is not preceded by the network name, then SNA Server fails to properly match against the remote APPC LU names configured in SNA Server. This causes SNA Server to reject the BIND if no network name is specified in the PLU name sent by the host system. STATUS ====== Microsoft has confirmed this to be a problem in SNA Server versions 3.0, 3.0 SP1, 3.0 SP2, and 4.0. This problem was corrected in the latest SNA Server versions 3.0 and 4.0 U.S. Service Packs. For information on obtaining these Service Packs, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K Additional query words: ====================================================================== Keywords : kbbuglist Technology : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ400 kbSNAServ300SP1 kbSNAServ300SP2 Version : WINDOWS:3.0,3.0 SP1,3.0 SP2,4.0 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.