DOCUMENT:Q177267 09-AUG-2001 [winnt] TITLE :FIX: Unattended Setup Disables EnableDHCPFlag on Second Adapter PRODUCT :Microsoft Windows NT PROD/VER:winnt:4.0 OPER/SYS: KEYWORDS:kbsetup kbOPK kbSBK ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Workstation version 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you perform an unattended installation on a system that is multihomed and the answer file (Unattend.txt) has the parameter DHCP = YES in the TCP/IP parameters section, only the first adapter will receive an IP address. The second adapter will be set to use a static IP address in which the IP address and subnet mask are blank. CAUSE ===== This is caused by the EnableDHCPFlag in Oemnxptc.inf being set to 0 (zero), which means off, for the second adapter. RESOLUTION ========== To work around this problem, modify the Oemnxptc.inf file on the distribution share so that it checks to see if STF_GUI_UNATTENDED is set to YES. 1. On your distribution share, expand the Oemnxptc.in_ file by typing the following at the command prompt: "Expand Oemnxptc.in_ Oemnxptc.inf" (without the quotation marks) 2. Rename the compressed Oemnxptc.in_ file to Oemnxptc.sav. This step is required because this not only offers a backup copy of the file but the setup program will always use the compressed version of the file if both are present. 3. Use any text editor to modify the following section of the .inf file: Before modifications are made: [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set InstallFromRas = $($6) set EnableDHCPFlag = $($7) set InstallList = $($8) ifstr(i) $(EnableDHCPFlag) == "" set EnableDHCPFlag = 0 Debug-Output "DHCP Phase 1 Flag :"$(EnableDHCPFlag) Debug-Output "DHCP Phase 1 Adapter :"$(EnableDHCPForThisAdapter) endif ifstr(i) $(InstallList) == "" set InstallList = {"1","1","0","0","0","0","0","0"} After modification are made: [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set InstallFromRas = $($6) set EnableDHCPFlag = $($7) set InstallList = $($8) ifstr(i) $(EnableDHCPFlag) == "" set EnableDHCPFlag = 0 ;**************modified code begins here**************** Ifstr(i) $(!STF_GUI_UNATTENDED) == YES set EnableDHCPFlag = 1 endif ;**************Modifications end here****************** Debug-Output "DHCP Phase 1 Flag :"$(EnableDHCPFlag) Debug-Output "DHCP Phase 1 Adapter :"$(EnableDHCPForThisAdapter) endif ifstr(i) $(InstallList) == "" set InstallList = {"1","1","0","0","0","0","0","0"} 4. Save the file and begin your unattended setup. STATUS ====== Microsoft has confirmed this to be a problem in the Microsoft Windows NT version 4.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. Additional query words: unattend two NIC Unattended Setup ====================================================================== Keywords : kbsetup kbOPK kbSBK Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : winnt:4.0 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.