DOCUMENT:Q173531 07-SEP-2001 [winnt] TITLE :How to Configure Printers on FPNW to Service Pserver.nlm PRODUCT :Microsoft Windows NT PROD/VER:WinNT:3.5,3.51,4.0 OPER/SYS: KEYWORDS:kbprint kbsetup ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 ------------------------------------------------------------------------------- IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information on how to do this, view the "Restoring the Registry" online Help topic in Regedit.exe or the "Restoring a Registry Key" online Help topic in Regedt32.exe. SUMMARY ======= Novell offers two NetWare Pserver utilities: Pserver.nlm, which runs on the NetWare file server, and Pserver.exe, which runs on a dedicated workstation. The two utilities serve basically the same purpose: they run as a resident program servicing up to 16 physical printers, and they poll the queues attached to those printers. Microsoft supports clients printing on both types of printer servers. MORE INFORMATION ================ Use the procedure below to set up a print server to service a printer queue located at another server. In this case, you are going to service multiple printers attached and configured on a NetWare 3.x server. The Netware Pserver may then service Rprinters. (RPRINTER is a Novell utility that allows the sharing of printers connected to workstations; it may be run against NetWare's Pserver.nlm.) In this example, the following assumptions are made: +-------------------------------------------------------------------------+ | NetWare server: | | +-------------------------------------------------------------------------+ | NetWare file server name: | RED_1 | +-------------------------------------------------------------------------+ | NetWare print server Name: | PS_1 | +-------------------------------------------------------------------------+ | NetWare printer name: | PRN_1 PRN_2 PRN_3 PRN_4 | +-------------------------------------------------------------------------+ | NetWare print queue name: | NW_Q1 NW_Q2 NW_Q3 NW_Q4 | +-------------------------------------------------------------------------+ | File server(s) being serviced: | RED_1 NT_1 | +-------------------------------------------------------------------------+ +----------------------------------------------------------------------------+ | Windows NT FPNW Server: | | +----------------------------------------------------------------------------+ | FPNW server name: | NT_1 | +----------------------------------------------------------------------------+ | FPNW print server name: | PS_1 | +----------------------------------------------------------------------------+ | FPNW printer name: | PRN_1 PRN_2 PRN_3 PRN_4 | +----------------------------------------------------------------------------+ | FPNW print queue name: | NT_Q1 NT_Q2 NT_Q3 NT_Q4 | +----------------------------------------------------------------------------+ | File server(s) being serviced: | NT_1 RED_1 | +----------------------------------------------------------------------------+ NOTE: The print server name and printer name must be identical on both the NetWare and FPNW servers. To set up the print server to service a printer queue located at another server, use the following steps: 1. Use Print Manager to create a printer on the FPNW server, and call it NT_Q1, NT_Q2, NT_Q3, or NT_Q4. 2. Select the correct driver for your printer from the printer's driver list, or click Other and type in the path for the drivers provided by the manufacturer. 3. Type the description (optional). 4. In the Print To box, click one NetWareCompatiblePServerX port. Each printer in the group should be associated with the same NetWareCompatiblePServerX port, up to a limit of 16 printers. 5. Share the printer on the network; FPNW will not see the queue unless it is shared. Make sure the share uses an 8.3 naming convention for downward compatibility. 6. Click the Details button. Set the Print Processor type to NWPRINT, if it is not set already. 7. Click OK to save the configuration. 8. Repeat steps 1 through 7 for each printer to be installed. 9. Under Server Manager, select FPNW, and then click Print Servers. a. Add a new print server. b. Call it PS_1. Provide a password if needed, or leave it blank. This user account, PS_PS_1, will be used by NetWare within User Manager to log on to the FPNW server. c. Select PS_1, and then click the Printers button to add a new printer. Call it PRN_1. d. Click to select the Defined Elsewhere type. e. Click OK to save the configuration. f. Repeat steps a through e for each printer to be installed, incrementing the number in the printer name (step c) by one each time. g. Select each printer in turn and click the Queues button in the Printers dialog box. Add the queue from the Available Queues box; for the first printer this will be NT_Q1, and so on. Click OK to save the configuration. h. Repeat step g for each printer to be installed, each time selecting the queue that corresponds with the printer that was created in Print Manager in step 1 (NT_Q2, NT_Q3, and so on). i. Click to select the File Server option in the Print Servers dialog box, and add RED_1 to be serviced from the available list of file servers. After you have completed all the steps above, run Registry Editor to enable all the newly installed printers. Failure to do so will result in the following error message: Not authorized to service queue . Queue will not be serviced by Printer 0, . To resolve this problem, use the following steps: WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall Windows 95. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. For information about how to edit the registry, view the Changing Keys and Values online Help topic in Registry Editor (Regedit.exe). Note that you should make a backup copy of the registry files (System.dat and User.dat) before you edit the registry. 1. Highlight the following Registry subkey: HKEY_LOCAL_MACHINE\System\CurrentControlSet \Services\FPNW\Bindery\Type03 NOTE: The above registry key is one path; it has been wrapped for readability. 2. Expand the Name container to find all queues that are assigned to the Pserver, which will look similar to the following: TQUEUE4 ObjectID 0x80040003 TQUEUE3 ObjectID 0x80030003 TQUEUE2 ObjectID 0x80020003 TQUEUE1 ObjectID 0x80010003 3. After you know the object IDs of the relevant queues (for example, TQUEUE4 ObjectID 0x80040003), go to the subcontainer for that object ID (still in the Type03 container). There will be two containers: one called NT_Q_NAME, the other called Q_SERVERS. 4. Of the relevant queues (TQUEUE1, TQUEUE2, TQUEUE3, or TQUEUE4 in this example), one of the Q_SERVERS will have nonzero values in the Segment1 field, and the others will have all zeros. The Q_SERVERS that have all zeros are incorrect, as this is the list of object IDs of PServer devices that can access it. 5. Copy the nonzero Segment1 field from its queue and paste the binary data into the Segment1 field of the queue that contains all zeros. This will give both queues the same list of Pservers. 6. After you have replaced the all-zero data fields, you do not need to reboot the server; the Pserver will work immediately. NOTE: If you go back into Server Manager and try to configure the Pserver and/or queues, you may further corrupt these registry settings. If this happens, you will have to go back into the registry and manually reconstruct the settings. The FPNW Pserver is now configured to service the File server RED_1, running print server PS_1. You will need to run PCONSOLE against the NetWare server RED_1, to configure print server PS_1 to service Windows NT FPNW server NT_1. Use the following steps: 1. From a command prompt, run Pconsole.exe. 2. Click Print Server Information, click PS_1, click Print Server Configuration, and then click File Servers to be Serviced. 3. Press the INSERT key. 4. Click Available File Servers, click FPNW Server (NT_1), and then press ENTER. 5. Press ESCAPE to exit Pconsole. 6. Unload or reload Pserver.nlm from the system console. NetWare and Windows NT clients can now attach or connect to the NT_Q1 printer queue and print to the Pserver on RED_1. ====================================================================== Keywords : kbprint kbsetup Technology : kbWinNTsearch kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search Version : WinNT:3.5,3.51,4.0 Hardware : ALPHA x86 Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.