DOCUMENT:Q172762  09-AUG-2001  [winnt]
TITLE   :Continuous Bhnt.sys Load and Unload Causes STOP 0xA and 0x7F
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:4.0
OPER/SYS:
KEYWORDS:kbWinNT400sp4fix

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation version 4.0 
 - Microsoft Windows NT Server version 4.0 
 - Microsoft Windows NT Server version 4.0, Terminal Server Edition 
-------------------------------------------------------------------------------

SYMPTOMS
========

You may receive one of the following STOP error messages in Windows NT:

   0x0000000A (0x00000003, 0x0000001c, 0x00000000, 0x00000003)

NOTE: The parameters may vary.

   0x0000007F (0x0000008, 0x0000000, 0x00000000, 0x00000000)

NOTE: The parameters will appear as above.

   0x0000001e (c0000005 f1f733f7 00000000 0000000c)

NOTE: The third parameter will be different and is dependent on system
configurations.

CAUSE
=====

This problem is caused by drivers that load Bhnt.sys, or services that cause
Bhnt.sys to be loaded, to get the network counters, and then unload it. If this
happens continuously, a corruption may occur in the unloading of Bhnt.sys.


RESOLUTION
==========

To resolve this problem, do any one of the following:

 - Obtain the latest version of Compaq Insight Management Agents for Windows NT
   from Compaq, if applicable.


 - Configure BH Service (Network Monitor Agent Driver) to load at system
   startup.

 - To resolve this problem, obtain the latest service pack for Windows NT 4.0 or
   Windows NT Server 4.0, Terminal Server Edition. For additional information,
   please see the following article in the Microsoft Knowledge Base:

   Q152734 How to Obtain the Latest Windows NT 4.0 Service Pack



STATUS
======

Microsoft has confirmed this to be a problem in the Network Monitor Agent
Driver. This problem was first corrected in Windows NT 4.0 Service Pack 4.0 and
Windows NT Server 4.0, Terminal Server Edition Service Pack 4.

MORE INFORMATION
================

Compaq Insight Manager is manufactured by Compaq, a vendor independent of
Microsoft; we make no warranty, implied or otherwise, regarding this product's
performance or reliability.

Additional query words: cpqmgmt.sys

======================================================================
Keywords          : kbWinNT400sp4fix 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbNTTermServ400 kbNTTermServSearch
Version           : winnt:4.0
Hardware          : x86
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.