DOCUMENT:Q166393  08-AUG-2001  [winnt]
TITLE   :Windows NT May Hang or Show "Stop 0x1E" Error with Iomega Drive
PRODUCT :Microsoft Windows NT
PROD/VER:WinNT:4.0
OPER/SYS:
KEYWORDS:kbenv kberrmsg kbhw kbHardware

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 4.0 
 - Microsoft Windows NT Workstation version 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When you are using the Iomega Parallel Port Zip Drive drivers version 1.41,
Windows NT may hang or display a "STOP 0x1E" error message at startup.

CAUSE
=====

The drive is not connected to the parallel port.

RESOLUTION
==========

To correct this behavior, use one of the following methods.

Method 1
--------

1. In Control Panel, double-click Devices.

2. In the list of devices, click PPA3NT.

3. Click Startup, and then set the device to Manual. Manually start the PPA3NT
   device by repeating steps 1-2 and clicking Start to load the driver when the
   drive is connected.

Method 2
--------

1. In Control Panel, double-click Devices.

2. In the list of devices, click PPA3NT.

3. Click Startup and then set the device to Disabled. When the drive is
   connected, set the device to Boot.

Method 3
--------

Contact the manufacturer for a possible updated driver.

MORE INFORMATION
================

The third-party product discussed in this article is manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise, regarding
this product's performance or reliability.

======================================================================
Keywords          : kbenv kberrmsg kbhw kbHardware 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400
Version           : WinNT:4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.