DOCUMENT:Q163837 09-AUG-2001 [winnt] TITLE :SNMP Query to Windows NT Returns Same Value for NTS and NTW PRODUCT :Microsoft Windows NT PROD/VER:winnt:3.51,4.0 OPER/SYS: KEYWORDS:kbnetwork kbSDKPlatform kbSNMP kbGrpDSNetkbbuglist kbfixlist ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.51, 4.0 - Microsoft Windows NT Server versions 3.51, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you use an SNMP utility to obtain the system type from a computer running Windows NT, the value returned is the same for both Windows NT Server and Windows NT Workstation. The system types appear to be identical. Because Windows NT workstations and servers have different capabilities, it is necessary to differentiate between these versions of Windows NT, especially when managing a large network. In addition, it is necessary to differentiate between Windows NT Servers and Domain Controllers, since they also have different roles in the domain model. CAUSE ===== The SysObjectID field (1.3.6.1.4.1.311.1.1.3.1) returned by the computer running Windows NT is the same if the computer is running Windows NT Server or Windows NT Workstation. RESOLUTION ========== A change was made in Windows NT 4.0 Service Pack 2 (SP2) and Windows NT 3.51 post-SP5 to the SNMP components so that the different system types are now reported as follows: 1.3.6.1.4.1.311.1.1.3.1.1 for Windows NT Workstation 1.3.6.1.4.1.311.1.1.3.1.2 for Windows NT Servers 1.3.6.1.4.1.311.1.1.3.1.3 for Windows NT Domain Controllers This enables the user of the SNMP utility to more precisely identify the type of Windows NT system. STATUS ====== Microsoft has confirmed this to be a problem in Microsoft Windows NT version 4.0. This problem was corrected in the latest Microsoft Windows NT 4.0 U.S. Service Pack. For information on obtaining the service pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K Microsoft has confirmed this to be a problem in Windows NT version 3.51. A supported fix is now available, but is not fully regression-tested and should be applied only to systems experiencing this specific problem. Unless you are severely impacted by this specific problem, Microsoft recommends that you wait for the next Service Pack that contains this fix. Contact Microsoft Product Support Services for more information. Additional query words: prodnt manager intel landesk hp openview insight insite OID ====================================================================== Keywords : kbnetwork kbSDKPlatform kbSNMP kbGrpDSNet kbbuglist kbfixlist Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT400search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS351search Version : winnt:3.51,4.0 Issue type : kbbug ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.