DOCUMENT:Q160055  07-SEP-2001  [winnt]
TITLE   :Warning Event ID 4010 Generated on Windows NT LPD Server
PRODUCT :Microsoft Windows NT
PROD/VER:winnt:3.51,4.0
OPER/SYS:
KEYWORDS:kbprint

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation versions 3.51, 4.0 
 - Microsoft Windows NT Server versions 3.51, 4.0 
-------------------------------------------------------------------------------

SYMPTOMS
========

When a client computer uses line printer remote (LPR) to send a print job to a
Windows NT computer running the TCP/IP Printing Service, the print job is not
accepted by the server. An Event 4010 from the Line Printer Daemon Service
(LPDSVC) will be generated in the Event Log. The description reads as follows:

   Request from X.X.X.X could not be satisfied: possibly due to network problems

where X.X.X.X is the TCP/IP address of the client computer.

CAUSE
=====

This problem occurs if the printer being used physically resides on a Windows
for Workgroups or Windows 95 computer. If the printer configuration on the
Windows NT computer was setup by choosing Connect To from the Printer menu and
manually specifying the name of the server and printer, then the
\\server\printer port name created will cause this error. If this same port is
later used when performing a Printer-Create, the error will still occur. The
port must be created via the Local Port option of adding a new port.


RESOLUTION
==========

1. Delete the current printer.

2. Remove the port that was created. Under Windows NT 3.51, this can be done
   from the Properties-Details dialog box of another local printer on the
   Windows NT computer (highlight the port in the Print To Additional Ports list
   and choose Delete Port). On Windows NT 4.0, this can be done from the Ports
   tab of the Properties dialog box for another local printer (select the port
   and choose Delete Port).

3. Close Printer folder or Print Manager then stop the Spooler service.

4. Restart the Spooler service and restart Print Manager or open the Printers
   folder.

5. On a Windows NT 3.51 computer, set up the printer again by choosing
   Printer-Create. For the Print To list box, choose Other, then choose Local
   Port, then specify the \\server\printer for the requested port name. Continue
   with printer setup. To create the printer under Windows NT 4.0, use the Add
   Printer wizard and choose My Computer. At the next window, choose Add Port,
   then choose Local Port. Now specify the \\server\printer for the requested
   port name. Continue with printer setup.

STATUS
======

Microsoft has confirmed this to be a problem in Windows NT versions 3.51 and
4.0. This problem was corrected in the latest Microsoft Windows NT 4.0 U.S.
Service Pack. For information on obtaining the service pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):

   S E R V P A C K


Additional query words: lanman port prodnt

======================================================================
Keywords          : kbprint 
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT400search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS351search
Version           : winnt:3.51,4.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.