DOCUMENT:Q157807 09-AUG-2001 [winnt] TITLE :Enabling AutoDial with Internet Explorer in Windows NT 4.0 PRODUCT :Microsoft Windows NT PROD/VER:4.0 OPER/SYS: KEYWORDS:kbnetworkkbfaq ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Server version 4.0 - Microsoft Windows NT Workstation version 4.0 ------------------------------------------------------------------------------- SUMMARY ======= You can use the AutoDial feature in Windows NT 4.0 to automatically prompt you to dial a phonebook entry when you try to connect to a network or Internet path that is not available or cannot be found. For example, when you double-click the Internet Explorer icon, Microsoft Internet Explorer attempts to load your start page. If you are not connected to your Internet service provider (ISP), you receive the following error message: Microsoft Internet Explorer Internet Explorer cannot open the Internet site http://. The site was not found. Make sure the address is correct, and try again. With AutoDial correctly configured, you are prompted to dial your ISP. MORE INFORMATION ================ To configure AutoDial, follow all of the steps in each of the following sections. Enable AutoDial By Location --------------------------- 1. Double-click My Computer and then double-click Dial-Up Networking. 2. In the Phonebook Entry To Dial box, click the entry for your ISP. 3. Click More, click User Preferences, and then verify that the location from which you are dialing is selected. Click OK. Remote Access Services Must Be Started -------------------------------------- 1. In Control Panel, double-click Services. 2. Locate the following two services and verify that they are started: - Remote Access AutoDial Manager - Remote Access Connection Manager Manually Set Your Start Page ---------------------------- 1. Using Dial-Up Networking, connect to your ISP. 2. Start Internet Explorer, and then connect to the Web page that you want to use as your start page. 3. On the View menu, click Options. 4. Click the Navigation tab. 5. In the Page box, click Start Page, and then click Use Current. 6. Click OK. The next time you start Internet Explorer without being connected to your ISP, you will be prompted to dial the connection. For additional information about AutoDial, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q152220 TITLE : How to View and Remove Information from AutoDial Additional query words: 4.0 ras dialup dun ====================================================================== Keywords : kbnetwork kbfaq Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT400search kbWinNTSsearch kbWinNTS400search kbWinNTS400 Version : 4.0 Issue type : kbhowto ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.