DOCUMENT:Q142159  08-AUG-2001  [winnt]
TITLE   :How to Automate SNMP Installation
PRODUCT :Microsoft Windows NT
PROD/VER::3.5,3.51
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Workstation versions 3.5, 3.51 
 - Microsoft Windows NT Server versions 3.5, 3.51 
 - MSPRESS Microsoft Windows NT Resource Kit, version 3.5 
-------------------------------------------------------------------------------

SUMMARY
=======

When you run Unattended or Computer Profile Setup (CPS), the SNMP protocol is
not installed to target computers (by default). However, you can accomplish
automated installation of SNMP by modifying setup files.

MORE INFORMATION
================

WARNING: Modification of INF files may cause serious, system-wide problems
before and after Setup and may require you to reinstall Windows NT to correct
them. Microsoft cannot guarantee that any problems resulting from the
modification of INF files can be solved. Make INF modifications at your own
risk. Corporate Network Systems does not support the modification of INF files.
For more information on INF files, refer to the Programmer's Guide included in
the Windows NT DDK or contact Microsoft Consulting Services or a Solution
Provider.

Computer Profile Setup
----------------------

On the distribution server, make these necessary modifications:

1. In the Defaults.inf file, change the third parameter of
   !TCPIpServiceMask in the [TCPIPServices] section to 1.

   [TCPIPServices]
   !TcpIpServiceMask = {"1","1","1","0","0","0","0","0"}

2. (Optional) Modify the script fragment in Oemnxpsn.inf so that the SNMP
   configuration dialog box is not displayed. With this modification, Setup will
   not allow you to configure SNMP, so it will be installed with default
   values.

   Code fragment before modification:

         LibraryProcedure Result, $(!TCPCFG_HANDLE), CPlSnmp, $(!STF_HWND)
         ifint $(Result) == 0
            set CommonStatus = STATUS_REBOOT
         else-ifint $(Result) == 1
            set CommonStatus = STATUS_REBOOT
         else
            set RegistryErrorIndex = $(Result)
            goto fatalregistry
         endif

      Code fragment after modification:

         ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
            Set Result = 0
         else
            LibraryProcedure Result, $(!TCPCFG_HANDLE), CPlSnmp, $(!STF_HWND)
         endif

         ifint $(Result) == 0
            set CommonStatus = STATUS_REBOOT
         else-ifint $(Result) == 1
            set CommonStatus = STATUS_REBOOT
         else
            set RegistryErrorIndex = $(Result)
            goto fatalregistry
         endif

Uattended Setup
---------------

1. Copy the \I386 directory from the Windows NT compact disc to your hard drive.

2. Expand i386\OEMNXPTC.IN_ to OEMNXPTC.INF. The Expand.exe file is located in
   the %SystemRoot%\SYSTEM32 directory.

3. Rename i386\OEMNXPTC.IN_ to OEMNXPTC.BK_.

WARNING: Modification of Setup files can cause serious, system-wide problems
before and after Setup and may require you to reinstall Windows NT tocorrect
them. Microsoft cannot guarantee that any problems resulting from the
modification of Setup files can be solved. Make Setup file modifications at your
own risk.

4. Modify i386\OEMNXPTC.INF:

   ; Original line below
   ;                 set InstallList = {"1","1","0","0","0","0","0","0"}
   ; Modified line below
                     set InstallList = {"1","1","1","0","0","0","0","0"}

   NOTE: It is not necessary to rename Oemnxptc.inf to Oemnxptc.in_.
   Windows NT Setup does not require the file to be compressed or named
   with an .in_ extension.

5. Expand i386\Oemnxpsn.in_ to Oemnxpsn.inf. The Expand.exe file is located in
   the %SystemRoot%\System32 directory.

6. Rename i386\OEMNXPSN.IN_ to OEMNXPSN.BK_.

WARNING: Modification of Setup files can cause serious, system-wide problems
before and after Setup and may require you to reinstall Windows NT to correct
them. Microsoft cannot guarantee that any problems resulting from the
modification of Setup files can be solved. Make Setup file modifications at your
own risk.

7. Modify i386\Oemnxpsn.inf using Step 2 in the Computer Profile Setup section.

Additional query words:

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNT350search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS350 kbMSPressSearch kbWinNTS351search kbWinNTS350search kbZNotKeyword6 kbZNotKeyword2
Version           : :3.5,3.51

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.