DOCUMENT:Q140084 07-SEP-2001 [winnt] TITLE :Permissions Error Creating an LPR Printer PRODUCT :Microsoft Windows NT PROD/VER:3.51 4.0 OPER/SYS: KEYWORDS:kbnetwork kbprint kbPrinting ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.51, 4.00 - Microsoft Windows NT Server versions 3.51, 4.00 ------------------------------------------------------------------------------- SUMMARY ======= The following error message appears when you attempt to create an LPR printer: Windows NT 4.0 -------------- Specified Port cannot be added. Access Denied. Windows NT3.51 -------------- You do not have permissions to add a port to this machine To create a TCP/IP printer in Windows NT, you must be a member of the Administrators or Server Operators group. CAUSE ===== Printer Operators and Power Users can create printers but do not have sufficent access to the registry to create new printer ports. Print Operators are also unable to create a DLC port. For additional information, please see the following article in the Microsoft Knowledge Base: ARTICLE-ID: Q160142 TITLE : Printer Operators Cannot Create DLC Ports WORKAROUND ========== Have the Administrator create the port before the Printer Operator or Power User creates a printer. Or Use the following steps to modify the default permissions to give Print Operators and Power Users the ability to create an LPR port. WARNING: Using Registry Editor incorrectly can cause serious, system-wide problems that may require you to reinstall Windows NT to correct them. Microsoft cannot guarantee that any problems resulting from the use of Registry Editor can be solved. Use this tool at your own risk. 1. Logon to the computer as an Administrator and run REGEDT32.EXE 2. Go to the following registry location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print 3. Select the Monitors Key under the Print Key 4. From the Security Menu select Permissions 5. Select Add then select the Print Operators group or Power Users group, set the Type of Access to "Full Control" then choose OK. 6. Select the option to "Replace Permissions on Existing Subkeys" Then choose OK. 7. Stop then restart the spooler service. Print Operators and/or Power Users will now be able to add an LPR Port. Additional query words: prodnt lpd tcpip rights create port ====================================================================== Keywords : kbnetwork kbprint kbPrinting Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS351 kbWinNTS351search Version : 3.51 4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.