DOCUMENT:Q139113 13-JUN-2001 [sna] TITLE :SNA Server Event 38, Qualifier 0004 and 0005 Not Documented PRODUCT :Microsoft SNA Server PROD/VER:WINDOWS:2.0,2.1,2.11 OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft SNA Server, versions 2.0, 2.1, 2.11, on platform(s): - the operating system: Microsoft Windows NT ------------------------------------------------------------------------------- SYMPTOMS ======== The SNA Server Reference Guide documents the "qualifier" codes that are used when SNA Server logs Event 38 in the Windows NT application event log. However, qualifier 0004 and 0005 are not documented in the Reference Guide, and the information that appears in the event log is limited. Microsoft has updated the code that contains the event log text to correct this problem. STATUS ====== Microsoft has confirmed this to be a problem in SNA Server for Windows NT. This problem was corrected in the latest SNA Server for Windows NT, 2.11 U.S. Service Pack. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K MORE INFORMATION ================ The following information describes the conditions under which Event 38 are logged, including a more complete description of each possible qualifier code. Event 38: APPC session deactivated abnormally Qualifier: 0002 = The session was deactivated because of a temporary (retry) error, and may be retried. CAUSE: This can occur when the SNA Server connection to the remote system has been lost. ACTION: Look for an Event 23 error and check it's qualifier code. The SNA Server Reference Guide lists the possible qualifier codes and likely causes. For an 802.2 link, qualifier AE and AF indicate timeout (or possible media or bridge/router problems) on your LAN and will require a LAN trace to diagnose, along with your SNA Server configuration file. Pass this information to Microsoft support personnel. 0003 = The session was deactivated because of a permanent (no retry) error, such as a parameter mismatch. Contact the administrator of the partner LUs system to determine which parameters are mismatched. CAUSE: A configuration mismatch exists between SNA Server and the remote system, or the remote system's session has been reset while the SNA Server's conversation remained active. ACTION: Capture an SNA Server data link control (DLC) and LU6.2 message trace of the problem. Pass these traces along with your SNA Server configuration file and your Windows NT application event log to Microsoft support personnel. 0004 = SNA Server unbound the session due to a protocol violation by the partner LU. CAUSE: SNA Server detected a protocol violation from the remote system on the session. ACTION: Capture an SNA Server data link control (DLC) and LU6.2 message trace of the problem and provide to Microsoft support personnel. 0005 = SNA Server sent an UNBIND(Cleanup) message on this session to the remote system in order to clean up the session. CAUSE: This can be caused by any one of the following: 1. The SNA Server client machine (where the 5250 emulator or APPC/CPIC application is running) has lost it's network session to the SNA Server. 2. The 5250 emulator or APPC/CPIC application issued a TP_ENDED(HARD) to cause the LU6.2 session to be ended. 3. The 5250 emulator or APPC/CPIC application failed abnormally or was ended by the user while in the middle of a conversation. ACTION: If a 5250 user is losing their emulation session unexpectedly (due to the client's network session being lost to the SNA Server), capture SNA Server client internal trace, LU6.2 message trace and APPC API trace of the problem, along with a matching sniffer or network monitor trace showing the lost network session and provide to Microsoft support personnel. To enable SNA client internal tracing, please see the following article in the Microsoft Knowledge Base: Q123256 Enabling SNA Server Windows 3.x Client Traces Additional query words: prodsna 3.5 3.51 ====================================================================== Keywords : Technology : kbAudDeveloper kbSNAServSearch Version : WINDOWS:2.0,2.1,2.11 Issue type : kbbug Solution Type : kbfix ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.