DOCUMENT:Q137966  14-DEC-2000  [crossnet]
TITLE   :Changing NetBIOS Name Resolution Order in Windows for Workgroups
PRODUCT :Windows for Workgroups and Windows NT Networking Issues
PROD/VER::1.0
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft TCP/IP-32, version 1.0 
 - Microsoft Windows for Workgroups 
-------------------------------------------------------------------------------

SUMMARY
=======

By default, the NetBIOS name resolution mode used by NetBIOS over TCP/IP is
B-node mode. If a WINS server is specified in the TCP/IP configuration, the
default mode is H-node.

MORE INFORMATION
================

In Windows for Workgroup running TCP/IP-32, these default settings can be
modified to change to NetBIOS name resolution mode to B-node, P-node, M-node, or
H-node.

To change the NetBIOS name resolution order:

1. Open the SYSTEM.INI file with a text editor.

2. In the [NBT] section, add the following entry:

   NodeType = 1, 2, 4, or 8

   These values specify the mode of NetBIOS name resolution used by NetBIOS over
   TCP/IP, where:

   1 = b-node

   2 = p-node

   4 = m-node

   8 = h-node.

   NOTE: This value can also be configured via DHCP Manager on the DHCP server.
   Under DHCP Options, select Scope or Global. The default is 1 (b- node). If no
   value is specified and a WINS server is specified and its NodeType is blank,
   then the default is 8 (h-node). On the Windows for Workgroups client
   configure it to use DHCP under Control Panel, Network, highlight TCP/IP
   Protocol in the Installed Network Software windows and select Configure.
   Enter an X in the Enable Automatic DHCP Configuration box by clicking on it.
   Click on OK and reboot the Windows for Workgroup client.

3. Save your changes and restart Windows.

NOTE: For more details on node type implementation refer to TCP/IP-32 online
help.

Additional query words: prodtcp 3.11

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbTCPIPSearch kbWFWSearch kbTCPIP100
Version           : :1.0

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.