DOCUMENT:Q137779 08-AUG-2001 [winnt] TITLE :Dell Latitude: Installing both Xircom TR and Ethernet PCMCIA PRODUCT :Microsoft Windows NT PROD/VER: OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation version 3.51 ------------------------------------------------------------------------------- SUMMARY ======= This article explains how to run both the Xircom CreditCard Ethernet IIps and the Xircom CreditCard Token Ring network cards simultaneously on a Dell Latitude XP4100 running Windows NT Workstation 3.51. MORE INFORMATION ================ This article assumes you need to have the Advanced Port Replicator (APR) attached to the computer. Because the APR has both a SCSI interface and a built-in Ethernet port, you must use the settings displayed below to get this combination of hardware initialized under Windows NT Workstation 3.51. Before you follow the two procedures below, install both cards, turn on the computer, and start Windows NT. Xircom CreditCard Ethernet IIPS Configuration --------------------------------------------- 1. Run Control Panel, choose Network, choose Add Adapter, select " Requires disk from manufacturer," and then choose OK. 2. When Setup prompts for a floppy disk, type the following: :\DRVLIB\NETCARD\X86\XCE10 where is the drive letter of your CD-ROM drive. 3. Select the Xircom CreditCard Ethernet IIps from the Select OEM Option window and choose OK. 4. From the Xircom CreditCard Ethernet IIps V1.17 Dialog Box, configure the card as follows: I/O Port Address: 0x220 Memory Address: 0xD4000 Interrupt: 3 Full Duplex: No Mode: I/O Mode Early Transmit: On Link Integrity: Enabled Cable Type: Auto Detect 5. Choose OK. Xircom CreditCard Token Ring Configuration ------------------------------------------ IMPORTANT: Make sure that the Token Ring adapter is connected to a Multi-Station Access Unit (MSAU/MAU) on a live Token Ring network before proceeding. If it is not connected to a live Token Ring network, the network card will not initialize. 1. Run Control Panel, choose Network, choose Add Adapter, select " Requires disk from manufacturer," and then choose OK. 2. When Setup prompts for a floppy disk, type the following: :\DRVLIB\NETCARD\X86\XCE10 where is the drive letter of your CD-ROM drive. 3. Select the Xircom CreditCard TokenRing from the Select OEM Option window and choose OK. 4. From the Xircom CreditCard Token Ring V1.17 Dialog Box, configure the card as follows: I/O Port Address: 0x380 Memory Address: 0xD6000 Interrupt: 15 Line Speed: EEPROM NOTE: An I/O Port address of 0x300, the default, will not work with the port replicator attached to Dell Latitude XP4100/CX 5. Choose OK and then Restart Windows NT. The Dell Latitude will be connected to both the Ethernet network and the Token Ring network. Additional query words: prodnt pcmcia ====================================================================== Keywords : Technology : kbWinNTsearch kbWinNTWsearch kbWinNT351search kbWinNTW351search kbWinNTW351 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.