DOCUMENT:Q135595 17-DEC-2000 [crossnet] TITLE :IPCONFIG Does Not Display Domain Name if Assigned Via DHCP PRODUCT :Windows for Workgroups and Windows NT Networking Issues PROD/VER::3.11,3.11a,3.11b OPER/SYS: KEYWORDS: ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft TCP/IP-32 for Windows for Workgroups, versions 3.11, 3.11a, 3.11b - Microsoft Windows for Workgroups ------------------------------------------------------------------------------- SYMPTOMS ======== The IPCONFIG.EXE utility included with Microsoft TCP/IP-32 for Windows for Workgroups 3.11 does not display the fully qualified domain name (FQDN) of the host computer if the domain name is assigned through DHCP. If the domain name is assigned manually, IPCONFIG correctly reports the FQDN. The version of IPCONFIG supplied with Windows NT does report the domain name. Sample output from IPCONFIG when run on Windows for Workgroups 3.11 DHCP client: Host Name . . . . . . . . . : ENG-LAB041 (should be ENG-LAB041.NETLAB.DOM in this example) DNS Servers . . . . . . . . : 157.55.136.218 157.55.136.219 157.55.136.220 Node Type . . . . . . . . . : Mixed NetBIOS Scope ID. . . . . . : IP Routing Enabled. . . . . : No WINS Proxy Enabled. . . . . : No NetBIOS Resolution uses DNS : No CAUSE ===== IPCONFIG.EXE does not read the domain name from the DHCP.BIN file. The domain name is read only from SYSTEM.INI. STATUS ====== Microsoft has confirmed this to be a problem in TCP/IP-32 for Windows for Workgroups versions 3.11, 3.11a, and 3.11b. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available. Additional query words: wfw wfwg 3.11 3.11a 3.11b prodtcp32 ====================================================================== Keywords : Technology : kbAudDeveloper kbTCPIPSearch kbWFWSearch kbZNotKeyword3 kbTCPIP311 kbTCPIP311a kbTCPIP311b Version : :3.11,3.11a,3.11b ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2000.