DOCUMENT:Q128142  08-AUG-2001  [winnt]
TITLE   :Systems with SMC NICs Hang When Using SMCMAC.DOS of NCADMIN
PRODUCT :Microsoft Windows NT
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.5 
-------------------------------------------------------------------------------

SYMPTOMS
========

Network Client Administrator (NCADMIN.EXE) allows you to create Network
Installation Startup Disk and Network Installation Disk Set of the Network
Client version 3.0 for MS-DOS and Windows. After you create and use the Startup
Disk or Disk Set for a Standard Micro Systems Corporation (SMC) Ethercard or
Starcard network interface card (NIC), the client computer stops responding
(hangs).

CAUSE
=====

This problem occurs when you use the SMC Ethercard or Starcard (SMCMAC.DOS)
driver with the NWLink IPX Compatible Protocol.

WORKAROUND
==========

To work around this problem:

1. Replace the SMCMAC.DOS driver in the Startup Disk and Disk Set with the
   SMC8000.DOS driver that is shipped with the SMC network card.

2. Modify the Network Client PROTOCOL.INI and the SYSTEM.INI files to replace
   references to SMCMAC and SMCMAC.DOS with SMC8000 SMC8000.DOS. For example:

   PROTOCOL.INI
   ------------

   [network.setup]
   version=0x3110
   netcard=MS$SMC8000,1,MS$SMC8000,1
   transport=ms$ndishlp,MS$NDISHLP
   transport=ms$nwlink,MS$NWLINK
   lana0=MS$SMC8000,1,ms$nwlink
   lana1=MS$SMC8000,1,ms$ndishlp

   [protman]
   drivername=PROTMAN$
   PRIORITY=MS$NDISHLP

   [MS$NDISHLP]
   DriverName=ndishlp$
   Bindings=MS$SMC8000

   [SMC8000]
   ADAPTERS=SMC8000
   BINDINGS=MS$SMC8000

   [MS$SMC8000]
   drivername=SMC8000$
   irq=5
   iobase=0x300
   ramaddress=0xD000
   ; maxrequests=8
   ; maxtransmits=12
   ; receivebuffers=12
   ; receivebufsize=256
   ; receivechains=12
   ; maxmulticast=16

   [ms$nwlink]
   drivername=nwlink$
   FRAME=Ethernet_802.2
   BINDINGS=MS$SMC8000
   LANABASE=0

   SYSTEM.INI
   ----------

   [network drivers]
   netcard=smc8000.dos
   transport=ndishlp.sys
   devdir=A:\NET
   LoadRMDrivers=yes

STATUS
======

Microsoft has confirmed this to be a problem in Windows NT version 3.5. We are
researching this problem and will post new information here in the Microsoft
Knowledge Base as it becomes available.

The SMC NICs discussed here are manufactured by Standard Micro Systems
Corporation, a vendor independent of Microsoft; we make no warranty, implied or
otherwise, regarding these products' performance or reliability.

Additional query words: prodnt

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNT350search kbWinNTSsearch kbWinNTS350 kbWinNTS350search

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.