DOCUMENT:Q127789 08-AUG-2001 [winnt] TITLE :LAN Manager Clients Cannot See Windows NT Computers PRODUCT :Microsoft Windows NT PROD/VER:3.5 4.0 OPER/SYS: KEYWORDS:kbnetwork ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Workstation versions 3.5, 3.51, 4.0 - Microsoft Windows NT Server versions 3.5, 3.51, 4.0 ------------------------------------------------------------------------------- SYMPTOMS ======== When you run NET VIEW on a LAN Manager client, the list of Windows NT workstations and servers in the domain is not available for several minutes. CAUSE ===== This problem occurs due to the Windows NT broadcast design. NOTE: To make Windows NT workstations and servers visible to LAN Manager clients, you must configure the Windows NT computers to broadcast server announcements to LAN Manager clients. To do this, run Control Panel, choose Network, select Server, choose Configure, the select "Make Browser Broadcast to LAN Manager 2.x clients," and choose OK. On Windows NT 4.0 machines, use REGEDT32.EXE to set the * entry in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameter s\ to 1. STATUS ====== Microsoft has confirmed this to be a problem in Windows NT version 3.5. This problem has been corrected in the latest U.S. Service Pack for Windows NT version 3.5. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K MORE INFORMATION ================ Original Design --------------- LAN Manager clients rely on server announcements that are broadcast over second class mailslots. The LAN Manager clients pickup server announcements and store them (for 1.5 times the announcement rate). If you run NET VIEW and the stored server announcement is still valid, the server name and server comments are displayed. If the next server announcement is not received by the client within 1.5 times the announcement rate, the server is dropped from the list. So if a client receives a server announcement at one minute intervals, it is likely to drop the server from the list if it does not receive another announcement in 1.5 minutes. Here is a sample server announcement from USER1STA to LAN Manager clients: USER1STA *NETBIOS Multicast SMB C transact, File = \MAILSLOT\LANMAN NETBIOS: Datagram (0x08), USER1STA -> USER1DOM <00> ----- NETBIOS: Destination Name = USER1DOM <00> NETBIOS: SMB Name Type = Workstation (00) NETBIOS: Source Name = USER1STA NETBIOS: SMB Name Type = Server (20) NETBIOS: NetBIOS Data: Number of data bytes remaining = 115 SMB: C transact, File = \MAILSLOT\LANMAN ------ SMB: Command = C transact ------ SMB: Mailslot class = Unreliable (broadcast) SMB: Byte count = 46 SMB: Byte parameters SMB: Path name = \MAILSLOT\LANMAN SMB: Transaction data SMB: Server announce opcode = Server announcement SMB: Service Flags Summary = 4097 (0x1001) SMB: .....................1 = Workstation service running SMB: ......................0. = Server service not available SMB: Major version = 3 SMB: Minor version = 50 SMB: Server announce rate = 720 SMB: Computer name = USER1STA SMB: Server comment = User1's System; NOTE: USER1STA sends a Multicast datagram to destination NetBIOS group name USER1DOM<00>. All LAN Manager clients post a NetBIOS Receive on their own domain, as well as other domains listed in their LANMAN.INI file, during initialization. The server announce rate is set is seconds. Therefore, the server announce rate of 720 in the above example, it equates to 12 minutes. In Windows NT 3.1, the announce LAN Manager Server parameter in the registry could be used to set the announcement interval. However, in Windows NT workstation and Windows NT Server version 3.5, a new algorithm was developed. The server announcements are made during the start of the server service, and at the following approximate intervals: .5, 1, 1.5, 4, 8, 12, remain at 12 minutes]. For example: # Time Src Description 1 27.390 USER1STA C transact, File = \MAILSLOT\LANMAN (30sec) 2 50.303 USER1STA C transact, File = \MAILSLOT\LANMAN (~20). 3 79.151 USER1STA C transact, File = \MAILSLOT\LANMAN (~30) 4 348.700 USER1STA C transact, File = \MAILSLOT\LANMAN (~260) 5 861.290 USER1STA C transact, File = \MAILSLOT\LANMAN (~520) 6 1586.99 USER1STA C transact, File = \MAILSLOT\LANMAN (~720) 7 2312.10 USER1STA C transact, File = \MAILSLOT\LANMAN (~720) 8 3033.39 USER1STA C transact, File = \MAILSLOT\LANMAN (~720) 9 3758.56 USER1STA C transact, File = \MAILSLOT\LANMAN (~720) The announce parameter is ignored. As a result, you may not see Windows NT workstation and server names when you run NET VIEW on LAN Manager clients, right after you boot the computer. The longest wait time, if you just miss a server announcement, would be 12 minutes. Once you receive the server announcement, it is valid for 18 minutes. New Design ---------- The default initial announce frequency for LAN Manager clients is now four minutes, and increases to once every 12 minutes. The AnnDelta delta parameter, although adjustable, defaults to 3000 milliseconds. This parameter specifies the time by which the announcement period can vary. This helps to prevent several servers from continuously announcing simultaneously, thereby reducing network load peaks. Additional query words: prodnt browsing mail slots server message block ====================================================================== Keywords : kbnetwork Technology : kbWinNTsearch kbWinNTWsearch kbWinNTW400 kbWinNTW400search kbWinNT351search kbWinNT350search kbWinNT400search kbWinNTW350 kbWinNTW350search kbWinNTW351search kbWinNTW351 kbWinNTSsearch kbWinNTS400search kbWinNTS400 kbWinNTS351 kbWinNTS350 kbWinNTS351search kbWinNTS350search Version : 3.5 4.0 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.