DOCUMENT:Q103881  30-JUL-2001  [crossnet]
TITLE   :The ISO Model: Theory and Function of Layered Design
PRODUCT :Windows for Workgroups and Windows NT Networking Issues
PROD/VER:
OPER/SYS:
KEYWORDS:

======================================================================
In 1978, the International Standards Organization (ISO) introduced
the ISO model for Open Systems Interconnect (OSI) as a first step
toward international standardization of the various protocols
required for network communication.

The OSI ISO model:

 - Was designed to establish data communications standards that would promote
   multi-vendor interoperability.

 - Consists of seven layers, with a specific set of network functions allocated
   to each layer, and guidelines for implementation of the interfaces between
   layers.

 - Details a specific set of protocols and interfaces to implement at each
   layer. So far, only the lowest four layers have been explicitly defined. The
   upper layers, and their interfaces to the lower ones, have not yet been
   completed. The overall model has become the basis for the government's
   required standard environment, GOSIP, beginning in August 1990.

Each layer of the OSI model can be viewed as an independent module.
You may (theoretically) substitute one protocol for another at the
same layer without affecting the operation of layers above or below.

In addition to explicitly defining protocols and interfaces at
selected layers, the OSI model also serves as a concept, providing a
reference for how data communication should take place. It provides a
common basis for the coordination of standards development for the
purpose of systems interconnection, while allowing existing standards
and architectures to be placed in perspective within the overall
reference model.

The principles that led to the creation of seven layers are:

 - A layer should be created only where a different level of abstraction is
   required.

 - Each layer should perform a well defined function.

 - The function of each layer should be chosen with an eye toward defining
   internationally standardized protocols.

 - The layer boundaries should be chosen to minimize the information flow across
   the interfaces.

 - The number of layers should be large enough that distinct functions need not
   be thrown together in the same layer out of necessity, and small enough that
   the architecture does not become unwieldy.

Additional query words:

======================================================================
Keywords          :  

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.