DOCUMENT:Q103147 08-AUG-2001 [winnt] TITLE :Err Msg: An Application Error Has Occurred... in SPOOLSS.EXE PRODUCT :Microsoft Windows NT PROD/VER:3.1 OPER/SYS: KEYWORDS:kbinterop ====================================================================== ------------------------------------------------------------------------------- The information in this article applies to: - Microsoft Windows NT Advanced Server, version 3.1 ------------------------------------------------------------------------------- SYMPTOMS ======== When you are using Microsoft Windows NT Advanced Server and trying to configure a printer under Services for Macintosh, you may receive the following error message: An application error has occurred and an application error log is being generated. SPOOLSS.EXE Exception: access violation (0xc0000005), Address: 0x766026ee Note: The address may be different, but the Access violation code should be the same. RESOLUTION ========== To avoid this error message, do not press the ENTER key while the AppleTalk zone is being searched for printers. STATUS ====== Microsoft has confirmed this to be a problem in Windows NT and Windows NT Advanced Server version 3.1. This problem was corrected in the latest U.S. Service Pack for Windows NT and Windows NT Advanced Server version 3.1. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces): S E R V P A C K MORE INFORMATION ================ Steps to Reproduce Problem -------------------------- 1. From the Control Panel, use the Network icon to install Services for Macintosh. 2. From the Main group window, choose the Print Manager icon. 3. If no printers appear in the Print Manager dialog box, choose Create Printer from the Printer menu and install a printer driver for an Apple LaserWriter printer. 4. Select the Apple LaserWriter, and then choose Properties from the Printer menu in Print Manager. 5. Choose Network Printer at the bottom of the Print To list. 6. Choose AppleTalk Printing Devices from the Print Destinations dialog box and then choose the OK button. 7. From the Available AppleTalk Printing Devices dialog box, select a zone and press the ENTER key. 8. While the computer is searching the zone, press ENTER again. At this point, the above error message will appear. Additional query words: sfm prodnt ====================================================================== Keywords : kbinterop Technology : kbWinNTsearch kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNT310Search Version : 3.1 ============================================================================= THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY. Copyright Microsoft Corporation 2001.