DOCUMENT:Q101730  08-AUG-2001  [winnt]
TITLE   :Deleting COM Ports from a Windows NT Installation
PRODUCT :Microsoft Windows NT
PROD/VER:3.1
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft Windows NT Server version 3.1 
 - Microsoft Windows NT Workstation version 3.1 
 - Microsoft Windows NT Advanced Server, version 3.1 
-------------------------------------------------------------------------------

Microsoft Windows NT and Windows NT Advanced Server support up to 256 COM
ports on each workstation. Use the Ports application in the Windows NT
Control Panel to add ports. However, Windows NT does not provide a
graphical interface to remove ports after adding them. To remove a COM
port, you must use the Registry Editor utility.

Perform the following five steps to remove a COM port from a Windows NT or
Windows NT Advanced Server workstation:

WARNING: Using Registry Editor incorrectly can cause serious, system-wide
problems that may require you to reinstall Windows NT to correct them.
Microsoft cannot guarantee that any problems resulting from the use of
Registry Editor can be solved. Use this tool at your own risk.

1. Start the Registry Editor (REGEDT32.EXE)

2. Find the following key:

   \HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services \Serial\Parameters

3. The Parameters key has several subkeys such as Serial10000, Serial10001, and
   so on. Each of these subkeys corresponds to a COM port. To determine the COM
   port to which each applies, check the corresponding DosDevices value.

4. After you determine the COM port to remove, choose the appropriate
   Serial<xxxxx> subkey and choose Delete from the Edit menu.

5. Close the Registry Editor, and then shut down and restart your system.

NOTE: In Windows NT 3.5 you can delete COM ports from Control Panel Ports.

Additional query words: prodnt communications FIFO modem

======================================================================
Keywords          :  
Technology        : kbWinNTsearch kbWinNTWsearch kbWinNTW310 kbWinNTSsearch kbWinNTS310 kbWinNTAdvSerSearch kbWinNTAdvServ310 kbWinNTS310search kbWinNT310Search kbWinNTW310Search
Version           : 3.1

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2001.