AlphaServer SC patch kit: ========================== AlphaServer SC Version : SC V2.6 UK1 Kit Name: CSP C1112.00/T64KIT0025318-V51BB25-20050408 Release Date: 15 April 2005 PTR: 153-1-4588 153-34-3 Quix Id : n/a QAR number: 98199 Abstract: V2.6 UK1 version of patch for QAR 98199 Big pages and large environment strings. Description of Patch: ===================== This patch will prevent the following panic: "panic: 'ubc_bigpage_alloc: hash failed(1)','KMF frompmap_remove_all(), ubc_invalidate()'" Kit location: ============= The patch kit is T64KIT0025318-V51BB25-20050408.tar and it is available on ITRC. Prerequisites: ============== Before installing this Patch kit, you should ensure the following: 1) You have all mandatory patches for this release installed.You should have Installed the patch T64KIT0025305-V51BB25-20050407 (C01110.00). 2) Specify the flag "-deps_only" when you are installing the patch on the Management Server and on the Domains. Kit checksum: ============= # cksum T64KIT0025318-V51BB25-20050408.tar 2758262267 5263360 T64KIT0025318-V51BB25-20050408.tar Updated files: ============== A list of the files included in this patch is given below along with the cksum values for each file. # cksum /sys/BINARY/vm.mod 3571094617 736663 /sys/BINARY/vm.mod Instructions: ============= This patch is provided as an sc_dupatch installable kit. Unpack it into a directory that is NFS mounted on all domains e.g. /nfs/cspkit and follow the following steps to install it: Patch required on Management Server (if used) : YES Patch required on Domains : YES 1) Verify that it is possible to install the patches as follows: On the Management Server (if used) #/usr/sbin/sc_dupatch -install -kit /nfs/cspkit/patch_kit -name -note -noroll -nolevel2 -noauto -precheck_only -patch C1112.00 On Domains: # sra command -domains all -member 1 -command '/usr/sbin/sc_dupatch -install -kit /nfs/cspkit/patch_kit -name -note -noroll -nolevel2 -noauto -precheck_only -patch C1112.00' Note: ====== if you encounter a message similiar to the following : ./sys/BINARY/nfs.mod: its origin can not be identified. then, you will need to run the actual installation (Step 3) with the " -deps_only " flag. For Example: # /usr/sbin/sc_dupatch -install -kit /nfs/cspkit/patch_kit -name -note -noroll -nolevel2 -noauto -deps_only -patch A full description of -deps_only is provided in Appendix A.1 below: 2) Now run the patch installation as follows: On the Management Server (if Used): ----------------------------------- Install the patch using the following commands: #/usr/sbin/sc_dupatch -install -kit /nfs/cspkit/patch_kit -name -note -noroll -nolevel2 -noauto -patch C1112.00 Rebuild your kernel # doconfig -c HOSTNAME Copy the new kernel to /vmunix Reboot the machine # shutdown -r now On Domains: ----------- Install the patch using the following commands: # sra command -domains all -member 1 -command '/usr/sbin/sc_dupatch -install -kit /nfs/cspkit/patch_kit -name -note -noroll -nolevel2 -noauto -patch C1112.00' Now Build and Deploy the Kernels: Make sure all nodes are up so that kernels will be built on all nodes # scrun -d all BuildKernels # scrun -d all DeployKernels Reboot the domains: # sra shutdown -domains all # sra boot -domains all Installation is complete at this point. Once the patch is installed and you are satisfied that it is working correctly the GENERIC kernels should also be updated, using the following command: # scrun -d all DeployKernels -g ******************************************************************************* Appendices: =========== A.1 Details of -deps_only option -------------------------------- Patches from UNIX support have previously been supplied to AlphaServer SC customers in a manual install format. That is, patches were installed by the customer running a script to copy the patch to the correct location. The standard UNIX support patches for non-SC customers have always been supplied using the CSP (Customer Specific Patch) format and are installed using the dupatch tool. Patches for SC customers are now also being provided in CSP format and these patches need to be installed using the sc_dupatch tool. sc_dupatch does some dependency checking to ensure the patches already on the machine are correct. It does this by comparing the chksums of files on the system with its own dependency list. If you have manually installed a patch that is on the dependency list for this new patch, then sc_dupatch will report an error and not install the patch. That is because sc_dupatch is not aware of patches installed manually. If sc_dupatch reports an error indicating a failure to install one or more patches, check whether this error message was generated by sc_dupatch detecting a mismatch caused by the existence of a manually installed patch. If you're satisfied that the conflict does arise from a manually-installed patch which you want to override, then a simple workaround is available in the form of the new deps_only switch. This has been introduced to cater specifically for such situations. It turns off the inventory-checking mechanism so that the pre-install checking is restricted to dependency-checking only. Simply re-run the install command with the deps_only flag to skip this inventory check and allow the installation to proceed.