ECO NUMBER:     VMS73_IIDRIVER-V0100
             PRODUCT:        OpenVMS Alpha OPERATING SYSTEM V7.3
             UPDATE PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.3




                                COVER LETTER


1  KIT NAME:

     VMS73_IIDRIVER-V0100


2  KITS SUPERSEDED BY THIS KIT:

     None.


3  KIT DEPENDENCIES:

     3.1  The following remedial kit(s), or later, must be installed
          BEFORE installation of this, or any required kit:

     VMS73_UPDATE-V0100


     3.2  In order to receive all the corrections listed in this kit,
          the following remedial kits, or later, should also be
          installed:

     None.


4  KIT DESCRIPTION:

     4.1  Version(s) of OpenVMS to which this kit may be applied:

     OpenVMS Alpha V7.3


     4.2  Files patched or replaced:


      o  [SYS$LDR]SYS$IIDRIVER.EXE (new image)



5  PROBLEMS ADDRESSED IN VMS73_IIDRIVER-V0100 KIT


      o  A cost reduced version of the server management card (Rev D04)
         was introduced for the DS20E system.  Because this version does
         not include EEPROM, it requires IIDRIVER to send a different
         I2C command to fetch the temperature.

         Images Affected:

          -  [SYS$LDR]SYS$IIDRIVER.EXE



-- COVER LETTER --                                              Page 2
                                                       30 January 2003


6  KIT INSTALLATION RATING:

     The following kit installation rating, based upon current CLD
     information, is provided to serve as a guide to which customers
     should apply this remedial kit.  (Reference attached Disclaimer of
     Warranty and Limitation of Liability Statement)

     INSTALLATION RATING:

       INSTALL_3 : To  be  installed  by  customers  experiencing  the  problems
           corrected.



7  INSTALLATION INSTRUCTIONS:

     Install this kit with the POLYCENTER Software installation utility
     by logging into the SYSTEM account, and typing the following at the
     DCL prompt:

     PRODUCT INSTALL VMS73_IIDRIVER /SOURCE=[location of Kit]

     The kit location may be a tape drive, CD, or a disk directory that
     contains the kit.

     Additional help on installing PCSI kits can be found by typing
     HELP PRODUCT INSTALL at the system prompt


     This kit requires a system reboot.  HP strongly recommends that a
     reboot is performed immediately after kit installation to avoid
     system instability

     If you have other nodes in your OpenVMS cluster, they must also be
     rebooted in order to make use of the new image(s).  If it is not
     possible or convenient to reboot the entire cluster at this time, a
     rolling re-boot may be performed.



     7.1  Special Installation Instructions:

          7.1.1  Scripting of Answers to Installation Questions

          During installation, this kit will ask and require user
          response to several questions.  If you wish to automate the
          installation of this kit and avoid having to provide responses
          to these questions, you must create a DCL command procedure
          that includes the following definitions and commands:

           -  $ DEFINE/SYS NO_ASK$BACKUP TRUE

           -  $ DEFINE/SYS NO_ASK$REBOOT TRUE

-- COVER LETTER --                                              Page 3
                                                       30 January 2003


           -  Add the following qualifiers to the PRODUCT INSTALL
              command and add that command to the DCL procedure.

                /PROD=DEC/BASE=AXPVMS/VER=V1.0


           -  De-assign the logicals assigned

          For example, a sample command file to install the
          VMS73_IIDRIVER kit would be:

          $
          $ DEFINE/SYS NO_ASK$BACKUP TRUE
          $ DEFINE/SYS NO_ASK$REBOOT TRUE
          $!
          $ PROD INSTALL VMS73_IIDRIVER/PROD=DEC/BASE=AXPVMS/VER=V1.0
          $!
          $ DEASSIGN/SYS NO_ASK$BACKUP
          $ DEASSIGN/SYS NO_ASK$REBOOT
          $!
          $ exit

     © Copyright [2003] Hewlett-Packard Development Company, L.P.

     Confidential computer software.  Valid license from HP and/or its
     subsidiaries required for possession, use, or copying.

     Consistent with FAR 12.211 and 12.212, Commercial Computer
     Software, Computer Software Documentation, and Technical Data for
     Commercial Items are licensed to the U.S.  Government under
     vendor's standard commercial license.

     Neither HP nor any of its subsidiaries shall be liable for
     technical or editorial errors or omissions contained herein.  The
     information in this document is provided "as is" without warranty
     of any kind and is subject to change without notice.  The
     warranties for HP products are set forth in the express limited
     warranty statements accompanying such products.  Nothing herein
     should be construed as constituting an additional warranty.

     DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY

     THIS PATCH IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND.  ALL
     EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
     INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR
     PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE
     EXTENT PERMITTED BY APPLICABLE LAW.  IN NO EVENT WILL HP OR ANY OF
     ITS SUBSIDIARIES BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR
     SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES,
     HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WITH
     RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH
     PATCH.