ECO NUMBER: VMS73_DECW_XTERM-V0100 PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.3 UPDATE PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.3 COVER LETTER 1 KIT NAME: VMS73_DECW_XTERM-V0100 2 KITS SUPERSEDED BY THIS KIT: None. 3 KIT DEPENDENCIES: 3.1 The following remedial kit(s), or later, must be installed BEFORE installation of this, or any required kit: VMS73_UPDATE-V0100 3.2 In order to receive all the corrections listed in this kit, the following remedial kits, or later, should also be installed: None. 4 KIT DESCRIPTION: 4.1 Version(s) of OpenVMS to which this kit may be applied: OpenVMS Alpha V7.3 4.2 Files patched or replaced: o [SYSEXE]DECW$DWT_FONT_DAEMON.EXE (new image) 5 PROBLEMS ADDRESSED IN VMS73_DECW_XTERM-V0100 KIT o Several FONTS (such as Hebrew) cause a process crash trying to start the FONT_DAEMON (process DECW$FD). Users will see the following error message: %SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=000000B9CA8`, PC=000000000003A328, PS=0000001B Images Affected: -- COVER LETTER -- Page 2 24 May 2002 - [SYSEXE]DECW$DWT_FONT_DAEMON.EXE 6 KIT INSTALLATION RATING: The following kit installation rating, based upon current CLD information, is provided to serve as a guide to which customers should apply this remedial kit. (Reference attached Disclaimer of Warranty and Limitation of Liability Statement) INSTALLATION RATING: INSTALL_3 : To be installed by customers experiencing the problems corrected. 7 INSTALLATION INSTRUCTIONS: Install this kit with the POLYCENTER Software installation utility by logging into the SYSTEM account, and typing the following at the DCL prompt: PRODUCT INSTALL VMS73_DECW_XTERM /SOURCE=[location of Kit] The kit location may be a tape drive, CD, or a disk directory that contains the kit. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt This kit requires a system reboot. Compaq strongly recommends that a reboot is performed immediately after kit installation to avoid system instability If you have other nodes in your OpenVMS cluster, they must also be rebooted in order to make use of the new image(s). If it is not possible or convenient to reboot the entire cluster at this time, a rolling re-boot may be performed. 7.1 Special Installation Instructions: 7.1.1 Scripting of Answers to Installation Questions During installation, this kit will ask and require user response to several questions. If you wish to automate the installation of this kit and avoid having to provide responses to these questions, you must create a DCL command procedure that includes the following definitions and commands: -- COVER LETTER -- Page 3 24 May 2002 - $ DEFINE/SYS NO_ASK$BACKUP TRUE - $ DEFINE/SYS NO_ASK$REBOOT TRUE - Add the following qualifiers to the PRODUCT INSTALL command and add that command to the DCL procedure. /PROD=DEC/BASE=AXPVMS/VER=V1.0 - De-assign the logicals assigned For example, a sample command file to install the VMS73_DECW_XTERM-V0100 kit would be: $ $ DEFINE/SYS NO_ASK$BACKUP TRUE $ DEFINE/SYS NO_ASK$REBOOT TRUE $! $ PROD INSTALL VMS73_DECW_XTERM/PROD=DEC/BASE=AXPVMS/VER=V1.0 $! $ DEASSIGN/SYS NO_ASK$BACKUP $ DEASSIGN/SYS NO_ASK$REBOOT $! $ exit Copyright (c) Compaq Computer Company, 2002 All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. Compaq, the Compaq logo, VAX, Alpha, VMS, and OpenVMS are registered in the U.S. Patent and Trademark Office. All other product names mentioned herein may be trademarks of their respective companies. Confidential computer software. Valid license from Compaq are required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided as is without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY THIS PATCH IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY APPLICABLE LAW. IN NO EVENT WILL COMPAQ BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND -- COVER LETTER -- Page 4 24 May 2002 REGARDLESS OF THE THEORY OF LIABILITY, WITH RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH PATCH.