ECO NUMBER: VMS726C2_LBR-V0100 PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.2-6C2 UPDATE PRODUCT: OpenVMS Alpha OPERATING SYSTEM V7.2-6C2 COVER LETTER 1 KIT NAME: VMS726C2_LBR-V0100 2 KITS SUPERSEDED BY THIS KIT: None. 3 KIT DEPENDENCIES: 3.1 The following remedial kit(s), or later, must be installed BEFORE installation of this, or any required kit: VMS726C2_COE-V0100 3.2 In order to receive all the corrections listed in this kit, the following remedial kits, or later, should also be installed: None. 4 KIT DESCRIPTION: 4.1 Version(s) of OpenVMS to which this kit may be applied: OpenVMS Alpha V7.2-6C2 4.2 Files patched or replaced: o [SYSLIB]LBRSHR.EXE (new image) o [SYSEXE]LIBRARIAN.EXE (new image) 5 PROBLEMS ADDRESSED IN VMS726C2_LBR-V0100 KIT o A change was made to the LIBRARIAN to correct a problem where inserting or replacing a module in a shareable image library, would occasionally complete with a "%LIBRAR-W-HISTERR, error accessing library update history" error. This change could cause the LIBRARIAN utility to corrupt libraries. Because of that, the %LIBRAR-W-HISTERR change is being removed. -- COVER LETTER -- Page 2 10 February 2003 Images Affected: - [SYSEXE]LIBRARIAN.EXE - [SYSLIB]LBRSHR.EXE 6 KIT INSTALLATION RATING: The following kit installation rating, based upon current CLD information, is provided to serve as a guide to which customers should apply this remedial kit. (Reference attached Disclaimer of Warranty and Limitation of Liability Statement) INSTALLATION RATING: INSTALL_2 : To be installed by all customers using the following feature(s): OpenVMS Alpha V7.2-6C2 Operating System 7 INSTALLATION INSTRUCTIONS: Install this kit with the POLYCENTER Software installation utility by logging into the SYSTEM account, and typing the following at the DCL prompt: PRODUCT INSTALL VMS726C2_LBR /SOURCE=[location of Kit] The kit location may be a tape drive, CD, or a disk directory that contains the kit. Additional help on installing PCSI kits can be found by typing HELP PRODUCT INSTALL at the system prompt This kit requires a system reboot. HP strongly recommends that a reboot is performed immediately after kit installation to avoid system instability If you have other nodes in your OpenVMS cluster, they must also be rebooted in order to make use of the new image(s). If it is not possible or convenient to reboot the entire cluster at this time, a rolling re-boot may be performed. -- COVER LETTER -- Page 3 10 February 2003 7.1 Special Installation Instructions: 7.1.1 Scripting of Answers to Installation Questions During installation, this kit will ask and require user response to several questions. If you wish to automate the installation of this kit and avoid having to provide responses to these questions, you must create a DCL command procedure that includes the following definitions and commands: - $ DEFINE/SYS NO_ASK$BACKUP TRUE - $ DEFINE/SYS NO_ASK$REBOOT TRUE - Add the following qualifiers to the PRODUCT INSTALL command and add that command to the DCL procedure. /PROD=DEC/BASE=AXPVMS/VER=V1.0 - De-assign the logicals assigned For example, a sample command file to install the VMS726C2_LBR-V0100 kit would be: $ $ DEFINE/SYS NO_ASK$BACKUP TRUE $ DEFINE/SYS NO_ASK$REBOOT TRUE $! $ PROD INSTALL VMS726C2_LBR/PROD=DEC/BASE=AXPVMS/VER=V1.0 $! $ DEASSIGN/SYS NO_ASK$BACKUP $ DEASSIGN/SYS NO_ASK$REBOOT $! $ exit © Copyright [2003] Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP and/or its subsidiaries required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Neither HP nor any of its subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. -- COVER LETTER -- Page 4 10 February 2003 DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY THIS PATCH IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY APPLICABLE LAW. IN NO EVENT WILL HP OR ANY OF ITS SUBSIDIARIES BE LIABLE FOR ANY LOST REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, WITH RESPECT TO ANY PATCH MADE AVAILABLE HERE OR TO THE USE OF SUCH PATCH.