PROBLEM: (QAR 23692, QAR 47716, QAR 51196, HPAQ1142J, QAR 51504, QAR QAR51757, MGO102627, QAR 51837, HPAQ20FLV, QAR 51865, UVO105149, QAR 51866, HPAQB119U, QAR 51987, QAR 52054, QAR 52377, MGO102769, QAR 52416, EVT102133, QAR 52499, QAR 52502, QAR 52504, QAR 52505, QAR 52604, QAR 52657, STLQ11212, QAR 53197, HPAQ500SR, QAR 53976, MGO102870, QAR 54415, QAR 54961, QAR 55409, UTO101507, QAR 55515, QAR 55691, QAR 57136, UVO105567, QAR 57374, QAR 57384, HPAQC0CM7, QAR 60179, DMO100329) (Patch ID: OSF435-425391) ******** This patch provides the following new functionality for bootable tape: o Using the "-d" option, a user can choose the location where the btcreate command creates its temporary files. Previously, btcreate was used to create its temporary files in the /usr filesystem and required about 156000 blocks (512 bytes per block) of disk space in the /usr filesystem. Now the user has the option of using free disk space anywhere on the system. In the following example, the temporary files will be created at /mnt/bt_tmp: # ./btcreate -d /mnt/bt_tmp Note, the "btcreate -d" option has been incorporated in the interactive mode also. o The ability for a user to label disks using their own disklabel script. If the customized disklabel script is not present, the btextract command will label the disks in the usual manner. A customized disklabel script has the following restrictions: o It must be located in the /usr/lib/sabt/etc directory. o It must be named custom_disklabel_file. PROBLEM: (HPAQ715Z0) (Patch ID: OSF435-305) ******** A problem in the btextract script could result in a failure of the script in the event that more than one disklabel file in the /etc/disk_lbl directory matches the disk name specified by the user. This has been corrected. PROBLEM: ('BCSM8083T / QAR 74139') (Patch ID: OSF435-360) ******** This patch fixes a problem when attempting to restore to system configured with backplane raid, btextract fails. PROBLEM: (BCSM608NX/73473) (Patch ID: OSF435-415) ******** This patch fixes a problem with the btcreate command where it does not pass the full pathname to newfs.