PROBLEM:  (QAR 61311, QAR 51365)    (Patch ID: OSF425-350)
********
This patch fixes a problem in which tp_active is not being set to BAD_MEM when
a machine check occurs during memory testing.  This value is used by
testpage_common to indicate a bad page has been encountered.

PROBLEM:  (QAR 60146, QAR 60608)    (Patch ID: OSF425-355)
********
This patch fixes a situation on the AlphaServer 4100 where a system heavily 
loaded with I/O traffic will exhibit error messages from the environmental
monitoring subsystem which are not in fact errors.

Example in context of other system messages:

20-APR-1998 12:16:55.87 FURLAN dlm_agent: suspending lock activity
20-APR-1998 12:16:56.12 FURLAN cnxagent: added node tlithamc
20-APR-1998 12:16:56.20 FURLAN dlm_agent: resuming lock activity

20-APR-1998 14:11:43.73 FURLAN ERROR: i2c_read_func_reg: enviromental monitorin
20-APR-1998 14:11:43.81 FURLAN physical sensing device not responding properly.

22-APR-1998 08:24:36.98 FURLAN mchan1: State change mcport = 72440000 mcerr= 20
22-APR-1998 08:24:37.07 FURLAN mchan1: old node state = 56 new node_state = 54
22-APR-1998 08:24:37.14 FURLAN mchan1: Log to Binary Error log ... error = 1401

PROBLEM:  (QAR 57266)    (Patch ID: OSF425-348)
********
This patch fixes a problem in which correctable memory errors are being logged 
to the system console as well as to the binary error log.

PROBLEM:  (CLD TKTB15201 CLD BCPMC205F)    (Patch ID: OSF425-529)
********
The problem will occur on any AS800 system with >1GB of memory. If a
kzpsa is installed at boot the kzpsa will not be configured but will
display the message:
pza0 at pci0 slot nn
pza in slot nn not configured.
The symptoms will range from random "noise" displayed on the screen, to
corrupted data or system panics.

PROBLEM:  (QAR 65926, QAR 63194)    (Patch ID: OSF425-650)
********
This patch fixes a problem with pyxis systems. These systems generate
extra
interrupts when PCI interrupts are processed. The following systems are
pyxis
systems:
	AlphaPC 164 LX
	AlphaPC 164 SX
	Digital Personal Workstation 433au w/Cypress PCI-ISA Bridge
	Digital Personal Workstation 500au w/Cypress PCI-ISA Bridge
	Digital Personal Workstation 600au w/Cypress PCI-ISA Bridge
	Digital Personal Workstation 433au 
	Digital Personal Workstation 500au 
	Digital Personal Workstation 600au

PROBLEM:  (ZUO00514A, ZUO80487A, HPAQA1NKG) (PATCH ID: OSF425-896)
********

The memory channel fails at boot with either patch kit 4,5, or 6
installed with the following messages logged:

vmunix: bss_rm_init_sync: RM_GET_CHARACTERISTICS failed with 216
vmunix: drd: Failed in bss_subsys_configure 12
vmunix: MEMORY CHANNEL API - get_RM_information() failed with status 216
vmunix: MEMORY CHANNEL API - register_RM_member_callback failed 216

PROBLEM:  (73025, KAOQ41936, 75529, 77885) (PATCH ID: OSF425-920)
********

This patch fixes several problems specific to AlphaServer 1200 and
AlphaServer 4100 systems.

	1) the user.log file has the following message:
		redundant power supply failure

	2) the messages file has the following intermittent messages:
		ERROR: i2c_read_temp: enviromental monitoring error;
		ERROR: i2c_read_fail_reg: enviromental monitoring error;
	       ERROR: i2c_read_func_reg: enviromental monitoring error;

	3) systems were shutting themselves down displaying the following
	   message:
		System has reached a high temperature condition.
		Possible problem
		source: Clogged air filter or high ambient room temperature.