ECO NUMBER:	 WANOSF_E04030
                -----------
                PRODUCT:	 Compaq Wide Area Networking for Tru64 UNIX
                --------
                UPDATED PRODUCT: Compaq Wide Area Networking for Tru64 UNIX 3.0
                ----------------
                APPRX BLCK SIZE: 40320
                ----------------


           DIGITAL


           Read Before Installing ECO04 for WAN Support for Digital
           UNIX Systems

           Product:           WAN V3.0 Support for Digital UNIX Systems
           Kit Name:          WANOSF_E04030

           ECO Kit WANOSF_E04030 Description


           Corrections have been included for the following
           components:


             o  Sockets/X.25

             o  Base/X.25

             o  WDD

             o  ISDN

             o  Access

             o  X.25 Library

           Installation Overview

           The existing X.25 kit must first be removed.  Log in to the
           root account and use setld to remove the kits.  The
           following command removes the kits:

             # setld -d `setld -i                            \
                 | grep installed                            \
                 | awk '/^CTA|^ISD|^WDA|^XXA|^ZZA/ {printf ("%s ",$1)}'`


           NOTE: If WAN ECO 1 or ECO 2 or ECO3 are installed on the system, it
                 must be removed first. Please refer the release notes on
                 removing kits.

           To save the existing configuration, answer "No" to the
           prompts that are displayed during the kit removal process.

           Once the kits are removed, reboot the system.

           Extract the tar kit into a temporary directory.  Change
           directory to WANOSF_E04030 and enter the following command:

             setld -l .

           After the kits have been loaded, follow the directions
           provided during the loading phase to configure WAN into the
           kernal.


  Copyright Digital Equipment Corporation 1998.  All Rights reserved.

  This software is proprietary to and embodies the confidential technology
  of Digital Equipment Corporation.  Possession, use, or copying of this
  software and media is authorized only pursuant to a valid written license
  from Digital or an authorized sublicensor.

        This ECO has not been through an exhaustive field test process.
        Due to the experimental stage of this ECO/workaround, Digital
        makes no representations regarding its use or performance.  The
        customer shall have the sole responsibility for adequate protection
        and back-up data used in conjunction with this ECO/workaround.



                ECO NUMBER:      WANOSF_E04030
                -----------
                PRODUCT:         WAN Support for Digital UNIX Systems
                --------
                UPDATED PRODUCT: WAN Support for Digital UNIX Systems 3.0
                ----------------
                APPRX BLCK SIZE: 22016
                ----------------




           DIGITAL


           Read Before Installing ECO04 for WAN Support for Digital
           UNIX Systems

           Product:           WAN V3.0 Support for Digital UNIX Systems
           Kit Name:          WANOSF_E04030

           ECO Kit WANOSF_E04030 Description


           Corrections have been included for the following
           components:


             o  Sockets/X.25

             o  Base/X.25

             o  WDD

             o  ISDN

             o  Access

             o  X.25 Library

           Installation Overview

           The existing X.25 kit must first be removed.  Log in to the
           root account and use setld to remove the kits.  The
           following command removes the kits:

             # setld -d `setld -i                            \
                 | grep installed                            \
                 | awk '/^CTA|^ISD|^WDA|^XXA|^ZZA/ {printf ("%s ",$1)}'`


           NOTE: If WAN ECO 1 or ECO 2 or ECO3 are installed on the system, it
                 must be removed first. Please refer the release notes on
                 removing kits.

           To save the existing configuration, answer "No" to the
           prompts that are displayed during the kit removal process.

           Once the kits are removed, reboot the system.

           Extract the tar kit into a temporary directory.  Change
           directory to WANOSF_E04030 and enter the following command:

             setld -l .

           After the kits have been loaded, follow the directions
           provided during the loading phase to configure WAN into the
           kernal.


  Copyright Digital Equipment Corporation 1998.  All Rights reserved.

  This software is proprietary to and embodies the confidential technology
  of Digital Equipment Corporation.  Possession, use, or copying of this
  software and media is authorized only pursuant to a valid written license
  from Digital or an authorized sublicensor.

        This ECO has not been through an exhaustive field test process.
        Due to the experimental stage of this ECO/workaround, Digital
        makes no representations regarding its use or performance.  The
        customer shall have the sole responsibility for adequate protection
        and back-up data used in conjunction with this ECO/workaround.