Index for Section 7

Alphabetical listing for T

Bottom of page

tms(7)
NAME
  tms - TMSCP magnetic tape interface

SYNOPSIS
  For XMI/KDM on Alpha-based systems:

       bus xmi0 at iop0 vector xmierror
       controller uq0 at xmi? port kdm vector uqintr
       device tape tms0 at uq0 drive 0

  For MSI Bus: only MIPS-based DECsystem 5500

       bus msi0 at ibus? vector msi_isr
       controller dssc1 at msi0 msinode 1
       device tape tms3 at dssc1 drive 3

  For XMI/CI/HSC on Alpha-based systems:

       bus xmi0 at iop0 vector xmierror
       bus ci0 at xmi? port np vector cimna_isr
       controller hsc6 at ci0 cinode 6
       device tape tms3 at hsc6 drive 3

  For tms devices dual ported between two controllers:

       device tape tms2 at * drive 2

DESCRIPTION
  The TMSCP driver provides a standard tape drive interface, as described in
  mtio(7). This is a driver for any controller that adheres to the Tape Mass
  Storage Control Protocol (TMSCP). The TMSCP controllers communicate with
  the host through a packet-oriented protocol termed the Tape Mass Storage
  Control Protocol.

  Tape Support - Alpha-based systems

  TA78, TA79, TA81, TA90, TA90E, TA91

  Diagnostics

  All diagnostic messages are sent to the error logger subsystem.

FILES
  /dev/tape/tape?_d?

  /dev/ntape/tape?_d?

SEE ALSO
  mtio(7), MAKEDEV(8), uerf(8), tapex(8)

Index for Section 7

Alphabetical listing for T

Top of page