Index for Section 3X11

Alphabetical listing for X

Bottom of page

XFillRectangle(3X11)
X11R6
NAME
  XFillRectangle, XFillRectangles, XFillPolygon, XFillArc, XFillArcs - fill
  rectangles, polygons, or arcs

SYNOPSIS
  XFillRectangle(display, d, gc, x, y, width, height)
	  Display *display;
	  Drawable d;
	  GC gc;
	  int x, y;
	  unsigned int width, height;

  XFillRectangles(display, d, gc, rectangles, nrectangles)
	  Display *display;
	  Drawable d;
	  GC gc;
	  XRectangle *rectangles;
	  int nrectangles;

  XFillPolygon(display, d, gc, points, npoints, shape, mode)
	  Display *display;
	  Drawable d;
	  GC gc;
	  XPoint *points;
	  int npoints;
	  int shape;
	  int mode;

  XFillArc(display, d, gc, x, y, width, height, angle1, angle2)
	  Display *display;
	  Drawable d;
	  GC gc;
	  int x, y;
	  unsigned int width, height;
	  int angle1, angle2;

  XFillArcs(display, d, gc, arcs, narcs)
	  Display *display;
	  Drawable d;
	  GC gc;
	  XArc *arcs;
	  int narcs;

ARGUMENTS
  angle1
      Specifies the start of the arc relative to the three-o'clock position
      from the center, in units of degrees * 64.

  angle2
      Specifies the path and extent of the arc relative to the start of the
      arc, in units of degrees * 64.

  arcs
      Specifies an array of arcs.

  d   Specifies the drawable.

  display
      Specifies the connection to the X server.

  gc  Specifies the GC.

  mode
      Specifies the coordinate mode. You can pass CoordModeOrigin or
      CoordModePrevious.

  narcs
      Specifies the number of arcs in the array.

  npoints
      Specifies the number of points in the array.

  nrectangles
      Specifies the number of rectangles in the array.

  points
      Specifies an array of points.

  rectangles
      Specifies an array of rectangles.

  shape
      Specifies a shape that helps the server to improve performance.  You
      can pass Complex, Convex, or Nonconvex.

  width

  height
      Specify the width and height, which are the dimensions of the rectangle
      to be filled or the major and minor axes of the arc.

  x

  y   Specify the x and y coordinates, which are relative to the origin of
      the drawable and specify the upper-left corner of the rectangle.

DESCRIPTION
  The XFillRectangle and XFillRectangles functions fill the specified
  rectangle or rectangles as if a four-point FillPolygon protocol request
  were specified for each rectangle:

       [x,y] [x+width,y] [x+width,y+height] [x,y+height]

  Each function uses the x and y coordinates, width and height dimensions,
  and GC you specify.

  XFillRectangles fills the rectangles in the order listed in the array. For
  any given rectangle, XFillRectangle and XFillRectangles do not draw a pixel
  more than once.  If rectangles intersect, the intersecting pixels are drawn
  multiple times.

  Both functions use these GC components: function, plane-mask, fill-style,
  subwindow-mode, clip-x-origin, clip-y-origin, and clip-mask. They also use
  these GC mode-dependent components: foreground, background, tile, stipple,
  tile-stipple-x-origin, and tile-stipple-y-origin.

  XFillRectangle and XFillRectangles can generate BadDrawable, BadGC, and
  BadMatch errors.

  XFillPolygon fills the region closed by the specified path. The path is
  closed automatically if the last point in the list does not coincide with
  the first point.  XFillPolygon does not draw a pixel of the region more
  than once.  CoordModeOrigin treats all coordinates as relative to the
  origin, and CoordModePrevious treats all coordinates after the first as
  relative to the previous point.

  Depending on the specified shape, the following occurs:

    ·  If shape is Complex, the path may self-intersect.  Note that
       contiguous coincident points in the path are not treated as self-
       intersection.

    ·  If shape is Convex, for every pair of points inside the polygon, the
       line segment connecting them does not intersect the path. If known by
       the client, specifying Convex can improve performance. If you specify
       Convex for a path that is not convex, the graphics results are
       undefined.

    ·  If shape is Nonconvex, the path does not self-intersect, but the shape
       is not wholly convex. If known by the client, specifying Nonconvex
       instead of Complex may improve performance. If you specify Nonconvex
       for a self-intersecting path, the graphics results are undefined.

  The fill-rule of the GC controls the filling behavior of self-intersecting
  polygons.

  This function uses these GC components: function, plane-mask, fill-style,
  fill-rule, subwindow-mode, clip-x-origin, clip-y-origin, and clip-mask. It
  also uses these GC mode-dependent components: foreground, background, tile,
  stipple, tile-stipple-x-origin, and tile-stipple-y-origin.

  XFillPolygon can generate BadDrawable, BadGC, BadMatch, and BadValue
  errors.

  For each arc, XFillArc or XFillArcs fills the region closed by the
  infinitely thin path described by the specified arc and, depending on the
  arc-mode specified in the GC, one or two line segments.  For ArcChord, the
  single line segment joining the endpoints of the arc is used. For
  ArcPieSlice, the two line segments joining the endpoints of the arc with
  the center point are used.  XFillArcs fills the arcs in the order listed in
  the array. For any given arc, XFillArc and XFillArcs do not draw a pixel
  more than once. If regions intersect, the intersecting pixels are drawn
  multiple times.

  Both functions use these GC components: function, plane-mask, fill-style,
  arc-mode, subwindow-mode, clip-x-origin, clip-y-origin, and clip-mask. They
  also use these GC mode-dependent components: foreground, background, tile,
  stipple, tile-stipple-x-origin, and tile-stipple-y-origin.

  XFillArc and XFillArcs can generate BadDrawable, BadGC, and BadMatch
  errors.

DIAGNOSTICS
  BadDrawable
	  A value for a Drawable argument does not name a defined Window or
	  Pixmap.

  BadGC	  A value for a GContext argument does not name a defined GContext.

  BadMatch
	  An InputOnly window is used as a Drawable.

  BadMatch
	  Some argument or pair of arguments has the correct type and range
	  but fails to match in some other way required by the request.

  BadValue
	  Some numeric value falls outside the range of values accepted by
	  the request. Unless a specific range is specified for an argument,
	  the full range defined by the argument's type is accepted.  Any
	  argument defined as a set of alternatives can generate this error.

SEE ALSO
  XDrawArc(3X11), XDrawPoint(3X11), XDrawRectangle(3X11)

  Xlib -- C Language X Interface

Index for Section 3X11

Alphabetical listing for X

Top of page