The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
adding
a DMS client (Sec. 12.2)
a RIS client (Sec. 6.2)
DMS clients to /etc/hosts file (Sec. 10.2)
RIS clients to /etc/hosts file (Sec. 6.1.2)
software to existing DMS environment (Sec. 11.3)
address
gateway (Sec. 6.1.1)
hardware (Sec. 6.1.1)
allocating disk partitions for DMS (Sec. 10.3)
architecture
of RIS (Sec. 2.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
Berkeley Internet Name Domain
See BIND
BIND (Sec. 10.8.2)
BIND (Sec. 6.1.2)
BIND Configuration Application (Sec. 10.8.2)
booting
a DMS client (Sec. 12.3)
a RIS client (Sec. 5.0)
problems with DMS clients (Sec. 13.0)
BOOTP (Sec. 5.1)
BOOTP protocol
requirement for (Sec. 3.3)
bootptab file (Sec. 5.1)
bootptab file (Sec. 5.1)
bootptab file (Sec. 5.1.3)
bootptab file (Sec. 8.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
C2 security in DMS (Sec. 10.9)
C2 security in RIS (Sec. 3.6)
calculating
disk space for DMS (Sec. 10.6)
disk space for DMS file systems (Sec. 10.6.1)
CD-ROM
mounting (Sec. 11.1)
mounting (Sec. 11.2)
mounting (Sec. 4.2)
CDF
converting to for profile set (Sec. 7.4)
copying to RIS server (Sec. 7.2)
CD-ROM
locating device name (Sec. 1.3)
checking
status of daemons (Sec. 13.3)
client
adding for DMS (Sec. 12.2)
architecture of DMS (Sec. 9.3.1)
characteristics of DMS client (Sec. 9.3.4)
compatibility with the server (Sec. 11.1)
defined (Sec. 1.1)
description of (Sec. 1.2)
DMS
booting (Sec. 12.3)
troubleshooting (Sec. 13.0)
hardware compatibility for DMS (Sec. 10.1)
hardware compatibility for DMS (Sec. 11.1)
hardware compatibility for RIS (Sec. 3.1)
identifying hardware network address (Sec. 2.6)
listing for RIS (Sec. 6.5)
listing in DMS (Sec. 12.7)
naming service registration for DMS (Sec. 10.8.2)
registering for DMS (Sec. 10.8)
registration for RIS (Sec. 6.1)
registration information (Sec. 12.2)
registration information for DMS (Sec. 10.8.1)
removing from DMS (Sec. 12.6)
removing from RIS (Sec. 6.4)
software version compatibility for DMS (Sec. 10.1)
software version compatibility for DMS (Sec. 11.1)
software version compatibility for RIS (Sec. 3.1)
view of DMS areas (Sec. 9.3.3)
client area
calculating disk space for DMS (Sec. 10.6.2)
in DMS (Sec. 9.3.3)
client areas
establishing multiple for DMS (Sec. 9.3.3)
cloned client
registration problems (Sec. 8.4.3)
compatibility
DMS server and client (Sec. 11.1)
RIS server and client (Sec. 3.1)
configuring
DMS environments (Sec. 11.4.2)
controlling
growth of DMS root area (Sec. 12.9.1)
creating
RIS area (Sec. 4.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
daemon
bootpd (Sec. 8.5.1)
inetd (Sec. 5.1.1)
internet (Sec. 5.1.1)
joind (Sec. 5.1.2)
mountd (Sec. 10.5)
network
checking status for DMS (Sec. 13.3)
nfsd (Sec. 10.5)
nfsiod (Sec. 10.5)
portmap (Sec. 10.5)
required by NFS (Sec. 10.5)
tftpd (Sec. 5.1.4)
tftpd (Sec. 8.5.3)
Dataless Management Services
See DMS
deleting
a DMS client (Sec. 12.6)
a DMS software environment (Sec. 12.4)
a RIS client (Sec. 6.4)
RIS product list (Sec. 6.7)
determining
software subset size (Sec. 10.7)
DHCP (Sec. 5.1)
disk partitions
allocating for DMS (Sec. 10.3)
on DMS server (Sec. 10.1)
disk space
allocating for DMS (Sec. 10.3)
for DMS client area (Sec. 10.6.2)
overhead for DMS administration (Sec. 10.6.1)
planning for DMS (Sec. 10.6)
planning for DMS (Sec. 10.6.1)
planning for RIS (Sec. 3.2)
showing use of (Sec. 12.9.1)
displaying
disk usage (Sec. 12.9.1)
distribution device
description of (Sec. 1.2)
distribution media
See also CD-ROM
DMS (Sec. 1.0)
DMS (Sec. 9.1)
adding a client (Sec. 12.2)
booting a client (Sec. 12.3)
C2 security (Sec. 10.9)
client
troubleshooting (Sec. 13.0)
client area (Sec. 9.3.3)
client registration (Sec. 10.8)
client system disk space (Sec. 10.6)
configuring environments (Sec. 11.4.2)
controlling growth of root area (Sec. 12.9.1)
definition of (Sec. 9.1)
deleting an environment (Sec. 12.4)
disk space for environments (Sec. 10.6.1)
environment (Sec. 9.3.2)
files in /usr area (Sec. 9.3.2)
installing operating system on server (Sec. 10.7)
installing required software subsets (Sec. 10.7)
installing software in new environment (Sec. 11.2)
listing clients (Sec. 12.7)
listing clients (Sec. 6.5)
lock files (Sec. 13.1)
maintaining the environment (Sec. 12.9)
multiple environments (Sec. 9.3.2)
planning disk space (Sec. 10.6)
problems booting a client (Sec. 13.0)
removing a client (Sec. 12.6)
removing a client (Sec. 6.4)
required software for environments (Sec. 10.6.1)
root area (Sec. 9.3.1)
root area (Sec. 9.3.2)
root area (Sec. 9.3.2)
server management tasks (Sec. 12.0)
server preparation (Sec. 10.0)
showing product list (Sec. 12.8)
showing product list (Sec. 6.6)
software version on server (Sec. 10.1)
system components (Sec. 1.2)
DMS area (Sec. 9.3)
contents of (Sec. 9.3)
contents of (Sec. 9.3.2)
defined (Sec. 1.1)
DMS client
booting problems (Sec. 13.0)
database file (Sec. 12.1)
defined (Sec. 1.1)
full build support (Sec. 10.6.3)
information required for (Sec. 10.8.1)
modifying environment for (Sec. 12.5)
no build support (Sec. 10.6.3)
partial build support (Sec. 10.6.3)
planning disk space (Sec. 10.6)
planning swap space (Sec. 10.8.1)
types of kernel builds for (Sec. 10.6.3)
DMS clients
requirements for (Sec. 10.2)
DMS environment (Sec. 9.3.2)
adding software to existing (Sec. 11.3)
modifying for client (Sec. 12.5)
naming conventions for (Sec. 11.2)
DMS IP address
modifying for client (Sec. 12.5)
DMS lock files (Sec. 13.1)
DMS server
defined (Sec. 1.1)
LAN installation (Sec. 10.4)
maintaining (Sec. 12.9)
NFS installation (Sec. 10.5)
partition information (Sec. 10.1)
planning disk space (Sec. 10.6)
DMS servers
requirements for (Sec. 10.1)
dms.alpha areas (Sec. 10.6)
du command (Sec. 12.9.1)
Dynamic Host Configuration Protocol
See DHCP
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
environments area (Sec. 9.3.2)
calculating disk space (Sec. 10.6.1)
/etc/bootptab file (Sec. 5.1)
/etc/bootptab file (Sec. 5.1)
/etc/bootptab file (Sec. 5.1.3)
/etc/bootptab file (Sec. 8.5)
/etc/exports file (Sec. 13.4)
/etc/hosts file
adding DMS clients to (Sec. 10.8.2)
/etc/hosts file (Sec. 10.8.2)
adding DMS clients to (Sec. 10.2)
/etc/inetd.conf file (Sec. 8.5.1)
Ethernet (Sec. 10.4)
See also LAN
address of RIS client (Sec. 6.1.1)
setting up a client on (Sec. 3.4)
Ethernet address
specifying for DMS client (Sec. 12.2)
exported file systems for DMS (Sec. 13.4)
exports file (Sec. 13.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
setting up a client on (Sec. 3.4)
FDDI address
specifying for DMS client (Sec. 12.2)
file
.new.. (Sec. 9.3.2)
root area (Sec. 9.3.2)
root area (Sec. 9.3.2)
/usr area (Sec. 9.3.2)
file system
DMS environments (Sec. 10.6.1)
exported for DMS client (Sec. 13.4)
files
invoking during installation process (Sec. 7.0)
full build support for DMS client (Sec. 10.6.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
gateway address (Sec. 6.1.1)
gateways file
correcting entries (Sec. 6.8)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
hardware
compatibility for DMS (Sec. 10.1)
compatibility for DMS (Sec. 11.1)
compatibility for RIS (Sec. 3.1)
hardware address (Sec. 6.1.1)
modifying for DMS client (Sec. 12.5)
specifying for DMS client (Sec. 12.2)
hardware network address
identifying (Sec. 2.6)
hardware product kits
including into an existing RIS area (Sec. 4.4)
RIS support of (Sec. 4.4)
hardware update release
release installation (Sec. D.0)
troubleshooting (Sec. 13.7)
host name
limitations on (Sec. 10.8.1)
restrictions (Sec. 6.2)
hosts file
adding DMS clients to (Sec. 10.8.2)
adding RIS clients to (Sec. 6.1.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
identifying hardware network address (Sec. 2.6)
including hardware product kits
in a RIS area (Sec. 4.4)
inetd (Sec. 5.1.1)
inetd daemon (Sec. 5.1)
/etc/inetd.conf file (Sec. 8.5.1)
inetd.conf file (Sec. 5.1)
installation
of hardware product kits (Sec. 4.4)
of hardware update release (Sec. D.0)
of RIS software subsets
in existing area (Sec. 4.3)
in new area (Sec. 4.2)
of server operating system for RIS (Sec. 3.3)
installation cloning (Sec. 7.0)
installation of RIS server
LAN installation (Sec. 3.4)
installing
NFS (Sec. 10.5)
operating system on DMS server (Sec. 10.7)
required software subsets for DMS (Sec. 10.7)
software in existing DMS environment (Sec. 11.3)
software in new DMS environment (Sec. 11.2)
Internet address
See IP address
Internet Boot Protocol
See BOOTP
internet daemon (Sec. 5.1.1)
IP address
registering (Sec. 6.1.2)
registering for DMS client (Sec. 10.8.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
J
joind (Sec. 5.1.2)
joind daemon (Sec. 5.1)
joind daemon (Sec. 8.5.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel
customized for DMS clients (Sec. 9.3.3)
full build support for DMS client (Sec. 10.6.3)
generic (Sec. 9.3.2)
generic (Sec. 9.3.2)
no build support for DMS client (Sec. 10.6.3)
partial build support for DMS client (Sec. 10.6.3)
types of build support for DMS clients (Sec. 10.6.3)
kit
See subset
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
LAN (Sec. 1.1)
LAN (Sec. 1.1)
LAN (Sec. 1.2)
host addresses on (Sec. 10.8.2)
installation of RIS server (Sec. 3.4)
installing DMS server (Sec. 10.4)
layered products
disk space on DMS servers (Sec. 10.6.1)
License Management Facility
See LMF
listing
DMS clients (Sec. 12.7)
installed subsets (Sec. 12.9.2)
RIS clients (Sec. 6.5)
listing RIS products (Sec. 6.6)
LMF
required for servers (Sec. 10.1)
local area network
See LAN
lock files
DMS (Sec. 13.1)
RIS (Sec. 8.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
management of RIS (Sec. 6.0)
mandatory subsets
space required (Sec. 10.6.1)
trouble with (Sec. 8.4.1)
modifying
environment for DMS client (Sec. 12.5)
IP address for DMS client (Sec. 12.5)
network hardware address for DMS client (Sec. 12.5)
mountd daemon (Sec. 10.5)
mounting
a CD-ROM (Sec. 11.1)
a CD-ROM (Sec. 11.2)
a CD-ROM (Sec. 4.2)
multiple client areas in DMS (Sec. 9.3.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
naming conventions
for DMS environments (Sec. 11.2)
naming service (Sec. 6.1)
registering DMS clients (Sec. 10.8.2)
registering RIS clients (Sec. 6.1.2)
network
file system (Sec. 9.3.1)
naming service (Sec. 6.1)
Network Configuration Application
utility (Sec. 10.8.2)
network daemons
for DMS (Sec. 13.3)
Network File System
See NFS
network hardware address
modifying for DMS client (Sec. 12.5)
specifying for DMS client (Sec. 12.2)
network information
for DMS servers and clients (Sec. 10.1)
Network Information Service
See NIS
network interface
for DMS clients (Sec. 10.8.1)
network naming service
registering DMS client (Sec. 10.8)
.new.. files (Sec. 9.3.2)
NFS
checking server status (Sec. 13.2)
daemons required by (Sec. 10.5)
installation (Sec. 10.5)
used by DMS (Sec. 9.3.1)
using a remote RIS area (Sec. 4.5)
using mount point to install software (Sec. 10.1)
using mount point to install software (Sec. 11.2)
using mount point to install software (Sec. 11.2)
using mount point to install software (Sec. 4.2)
using mount point to install software (Sec. 4.2)
NFS server
checking status (Sec. 13.2)
nfsd daemon (Sec. 10.5)
nfsiod daemon (Sec. 10.5)
NIS (Sec. 10.8.2)
NIS (Sec. 6.1.2)
NIS (Sec. 6.1.2)
NIS utility (Sec. 10.8.2)
no build support for DMS client (Sec. 10.6.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
operating system
installable by RIS (Sec. 2.4)
installing on DMS server (Sec. 10.7)
installing on RIS server (Sec. 3.3)
tailored for DMS client (Sec. 9.3.3)
overhead
disk space (Sec. 10.6.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
PAK
required for servers (Sec. 10.1)
partial build support for DMS client (Sec. 10.6.3)
partitions
on DMS server (Sec. 10.1)
planning
disk space for DMS (Sec. 10.6)
planning disk space for RIS (Sec. 3.2)
portmap daemon (Sec. 10.5)
problems (Sec. 13.0)
product
showing list of (Sec. 12.8)
Product Authorization Key
See PAK
product environment (Sec. 2.3)
deleting products in (Sec. 6.7)
listing RIS products in (Sec. 6.6)
multiple in single RIS area (Sec. 2.3)
RIS products in listing (Sec. 6.6)
profile set (Sec. 7.0)
converting CDF to (Sec. 7.4)
creating (Sec. 7.2)
creating directories for (Sec. 7.2)
definition (Sec. 7.0)
deleting from RIS server (Sec. 7.6)
populating (Sec. 7.2)
registering for (Sec. 7.3)
registering RIS client for (Sec. 7.3)
protected system files (Sec. 9.3.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
registering a client (Sec. 6.1)
for DMS (Sec. 10.8)
for DMS (Sec. 10.8.2)
information required for DMS client (Sec. 10.8.1)
information required for DMS client (Sec. 12.2)
information required for RIS clients (Sec. 6.1.1)
problems in RIS (Sec. 8.4.1)
with naming service (Sec. 10.8.2)
with naming service (Sec. 6.1.2)
registration problems
cloned client (Sec. 8.4.3)
remote boot
flow (Sec. 5.2)
Remote Installation Services
See RIS
definition (Sec. 2.1)
remove
DMS client root directory (Sec. 11.3)
removing
a DMS client (Sec. 12.6)
a DMS software environment (Sec. 12.4)
a RIS client (Sec. 6.4)
software subsets (Sec. 12.9.3)
required software subsets
for DMS server (Sec. 10.1)
requirements
for DMS clients (Sec. 10.2)
for DMS servers (Sec. 10.1)
response failures
servers using bootpd daemon (Sec. 8.5.1)
servers using joind daemon (Sec. 8.5.2)
restrictions
running bootpd and joind (Sec. 8.5)
RIS (Sec. 1.0)
RIS (Sec. 1.2)
architecture of (Sec. 2.0)
checking client system registration (Sec. 7.5)
converting CDF (Sec. 7.4)
correcting gateways file entries (Sec. 6.8)
definition (Sec. 2.1)
deleting products (Sec. 6.7)
deleting profile set directory (Sec. 7.6)
disk space
planning (Sec. 3.2)
gateways file
correcting entries (Sec. 6.8)
installing software subsets (Sec. 4.2)
listing clients (Sec. 6.5)
listing products (Sec. 6.6)
listing products (Sec. 6.6)
lock files (Sec. 8.1)
management tasks (Sec. 6.0)
product environment (Sec. 2.3)
remote booting (Sec. 5.1)
remote booting (Sec. 5.2)
removing a client (Sec. 6.4)
removing client system from registration (Sec. 7.5)
removing multiple clients (Sec. 6.4)
server setup (Sec. 4.0)
startup messages (Sec. 2.2)
startup process (Sec. 2.2)
system components (Sec. 1.2)
troubleshooting (Sec. 8.0)
using an NFS mounted RIS area (Sec. 4.5)
RIS area (Sec. 2.1)
contents of (Sec. 2.3)
creating (Sec. 4.2)
defined (Sec. 1.1)
exporting and importing (Sec. 2.3)
including hardware product kits (Sec. 4.4)
multiple (Sec. 2.3)
RIS client
booting (Sec. 5.0)
defined (Sec. 1.1)
Ethernet address (Sec. 6.1.1)
host naming conventions (Sec. 6.2)
preparing to register (Sec. 6.1)
registering for profile set (Sec. 7.3)
RIS daemons
inetd (Sec. 5.1)
joind (Sec. 5.1)
tftpd (Sec. 5.1)
RIS files
bootptab (Sec. 5.1)
inetd.conf (Sec. 5.1)
RIS lock files (Sec. 8.1)
RIS server
defined (Sec. 1.1)
risdb file (Sec. 8.5)
root area
controlling growth of DMS (Sec. 12.9.1)
files in (Sec. 9.3.2)
files in (Sec. 9.3.2)
in DMS (Sec. 9.3.1)
root directory
losing DMS customization during remove (Sec. 11.3)
route for network
for DMS clients (Sec. 10.8.1)
running bootpd and joind
restrictions (Sec. 8.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
security in DMS (Sec. 10.9)
security in RIS (Sec. 3.6)
server
architecture of DMS (Sec. 9.3)
compatibility with the client (Sec. 11.1)
defined (Sec. 1.1)
description of (Sec. 1.2)
DMS management tasks (Sec. 12.0)
function in DMS (Sec. 9.3.1)
function in RIS (Sec. 2.1)
hardware compatibility for DMS (Sec. 10.1)
hardware compatibility for DMS (Sec. 11.1)
hardware compatibility for RIS (Sec. 3.1)
management tasks (Sec. 12.9.3)
management tasks for RIS (Sec. 6.0)
operating system installation for DMS (Sec. 10.7)
operating system installation for RIS (Sec. 3.3)
planning disk space for DMS (Sec. 10.6)
planning disk space for RIS (Sec. 3.2)
preparing DMS server (Sec. 10.0)
RIS setup preparation (Sec. 3.0)
software version compatibility for DMS (Sec. 10.1)
software version compatibility for DMS (Sec. 11.1)
software version compatibility for RIS (Sec. 3.1)
setld utility
listing subsets with (Sec. 12.9.2)
removing subsets with (Sec. 12.9.3)
sharing software
benefits (Sec. 1.1)
overview (Sec. 1.1)
showing
product list (Sec. 12.8)
RIS product list (Sec. 6.6)
software sharing via servers (Sec. 1.2)
software subsets
choosing for DMS (Sec. 11.2)
choosing for DMS (Sec. 11.3)
choosing for RIS (Sec. 4.2)
defined for RIS (Sec. 2.3)
descriptions of (Sec. 10.7)
descriptions of (Sec. 3.3)
for RIS (Sec. 2.3)
installing in existing DMS environment (Sec. 11.3)
installing in existing RIS area (Sec. 4.3)
installing in new RIS area (Sec. 4.2)
listing installed (Sec. 12.9.2)
removing (Sec. 12.9.3)
required for DMS (Sec. 10.7)
required for DMS environments (Sec. 10.6.1)
required for DMS server (Sec. 10.1)
sizes of (Sec. 10.7)
version compatibility for DMS (Sec. 10.1)
space requirements
mandatory subsets (Sec. 10.6.1)
startup messages
RIS (Sec. 2.2)
startup process
RIS (Sec. 2.2)
subnet mask
for DMS clients (Sec. 10.8.1)
swap space
for DMS client (Sec. 10.8.1)
SysMan Menu
using to install software for DMS (Sec. 10.7)
system disk space (Sec. 10.6)
system name
limitations on (Sec. 10.8.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
TFTP (Sec. 5.1)
TFTP (Sec. 5.1.4)
TFTP protocol
requirement for (Sec. 3.3)
tftpd (Sec. 5.1.4)
tftpd daemon (Sec. 5.1)
tftpd daemon (Sec. 8.5.3)
Token Ring
setting up a client on (Sec. 3.4)
Trivial File Transfer Protocol
See TFTP
troubleshooting
client not in RIS database (Sec. 8.4.5)
duplicate client hardware address (Sec. 8.4.2)
getname failure on RIS client (Sec. 8.2)
hardware update release (Sec. 13.7)
inability to mount root file system (Sec. 8.3)
loading incorrect kernel file (Sec. 8.5.3)
problems booting RIS client (Sec. 8.4.4)
response failures on servers using bootpd daemon (Sec. 8.5.1)
response failures on servers using the joind daemon (Sec. 8.5.2)
RIS client password expiration (Sec. 8.2)
RIS client registered on multiple RIS servers (Sec. 8.4.4)
RIS server response problems (Sec. 8.5)
system panics on boot (Sec. 8.3)
troubleshooting DMS servers (Sec. 13.0)
troubleshooting RIS problems (Sec. 8.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
user-supplied files
copying to RIS server (Sec. 7.2)
installation cloning (Sec. 7.0)
/usr area
files in (Sec. 9.3.2)
utilities
utilupdate (Sec. C.0)
utilupdate utility (Sec. C.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
/var/adm/ris/clients/risdb file (Sec. 8.5)
/var/adm/ris/gateways file (Sec. 6.8)
version compatibility for DMS (Sec. 10.1)
version compatibility for DMS (Sec. 11.1)
version compatibility for RIS (Sec. 3.1)
view by client of DMS areas (Sec. 9.3.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
W
WLS
DMS client
building Asian kernel (Sec. 11.5.3)
DMS client setup (Sec. 11.5.2)
DMS server installation (Sec. 11.5.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Y
Yellow Pages service
See NIS