1. Backup your current SYS:SYSTEM and SYS:ETC subdirectories as a precaution.
2. At a work station attached to the NetWare 4.x server, create a new
directory on any NetWare volume. The directory can have any name.
MD PATCH
3. Copy NIP203.EXE into the new directory.
COPY NIP203.EXE PATCH
4. Type the following commands to extract the files.
CD PATCH
NIP203.EXE
If you are running a windows workstation, double-clicking on nip203.exe
will extract all the files automatically.
5. From the server console, run UNISTOP.NCF as a general precaution.
UNISTOP
6. From the server console, activate the installation program.
LOAD INSTALL
7. Select PRODUCT OPTIONS. The Currently Installed Products Menu appears
and lists the following:
NWIP 2.2B/C NetWare/IP 2.2
8. Press <Insert> to install new product.
9. Press <F3> to install the files in NIP203. The "SPECIFY DIRECTORY PATH"
dialogue box will appear.
10. Enter the path to the directory where the NIP203 files were extracted.
SYS:/PATCH/nip203
After the installation program installs the files, the "Currently
Installed Products" menu will list:
NWIP 2.2C NetWare/IP 2.2
NWUPD2.2D NetWare/IP Update 203
11. Exit the Installation program or press <ALT>+<ESC> to return to the
system console prompt.
12. From the server console, run UNISTART.NCF to restart NetWare/IP (and
other products if installed).
Note: To install NetWare/IP 2.2 on a GR SFT3 machine copy the NWIPINST.NLM
included in this patch to the source directory where the NetWare/IP 2.2
server installation files are located. Do the NetWare/IP 2.2 server
installation from this source directory and then install this patch
over it to incorporate the other fixes
COPY PATCH\SYSTEM\NWIPINST.NLM
<drive_or_vol>:PRODUCTS\NWIPSRV\NWIP1\
Install NetWare/IP 2.2
Install NIP203
|