MS-DOS: EMM386.EXE and VCPI Services (96625)
The information in this article applies to:
- Microsoft MS-DOS operating system 6.0
- Microsoft Windows for Workgroups 3.11
This article was previously published under Q96625 SUMMARY
The information in this article applies to all versions of EMM386.EXE
shown below:
Product Version of EMM386.EXE
----------------------------------------------------------
MS-DOS 6.0 4.45
MS-DOS 6.2 and 6.21 4.48
MS-DOS 6.22 4.49
Windows for Workgroups 3.11 4.48
EMM386.EXE included with MS-DOS 6.x and Microsoft Windows for
Workgroups version 3.11 provides support for the Virtual Control
Program Interface (VCPI) without having to set an expanded memory
page frame and without having to specify a VCPI memory pool.
VCPI services are provided by default--no special switches or
parameters are required. If you want to disable VCPI support, you must
use the NOVCPI switch on the EMM386.EXE command line in the CONFIG.SYS
file.
REFERENCES
For more information on the EMM386.EXE device driver and the NOVCPI
switch, refer to MS-DOS Help; type the following at the MS-DOS command
prompt:
Modification Type: | Major | Last Reviewed: | 10/13/2003 |
---|
Keywords: | KB96625 |
---|
|