Kodak Ekta Plus 7008 TrueType Problems in Landscape Mode (93235)
The information in this article applies to:
- Microsoft Windows 3.1
- Microsoft Windows 3.11
This article was previously published under Q93235 SYMPTOMS
Printing TrueType fonts on the C. Itoh CI-4, or Kodak Ekta Plus 7008
printer in landscape orientation while emulating the Hewlett-Packard (HP)
LaserJet IIP results in incorrect output. Portrait orientation is not
affected and TrueType fonts print correctly.
CAUSE
There is no specific driver available for this printer from either
Microsoft or Kodak. According to Kodak technical support, the problem
occurs when the printer is using the primary emulation of the HP
LaserJet IIP. It does not occur when using the HP LaserJet Series II
driver supplied with Windows 3.1.
WORKAROUND
Kodak recommends two workarounds: using the HP LaserJet Series II
driver, or selecting Print TrueType As Graphics.
Selecting Print TrueType As Graphics- Run the Control Panel.
- Choose the Printers icon.
- Select the HP LaserJet IIP.
- Choose the Setup button.
- Choose the Options button.
- Select the Print TrueType As Graphics check box.
MORE INFORMATION
The Kodak product included here is manufactured by a vendor
independent of Microsoft; we make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Modification Type: | Major | Last Reviewed: | 10/13/2003 |
---|
Keywords: | KB93235 |
---|
|