MoreFonts May Cause GP Fault in Windows 3.1 Help (92661)



The information in this article applies to:

  • Microsoft Windows 3.1
  • Microsoft Windows 3.11

This article was previously published under Q92661

SYMPTOMS

When you access any help files in Windows 3.1 or 3.11 after you have upgraded from Windows 3.0, the following error message may be displayed:
WINHELP has caused a General Protection Fault in module MFTYPE.DLL

CAUSE

This error message may be caused by an earlier installation of MicroLogic MoreFonts in Windows 3.0. MicroLogic Technical Support has confirmed that an updated version is required to run MoreFonts correctly with Windows 3.1.

WORKAROUND

To avoid this error, do the following:
  1. Use Microsoft Windows Notepad to open the SYSTEM.INI file.
  2. Remove the following lines from the [boot] section:
          mf.system.drv=system.drv
          system.drv=mfsystem.drv
    						
  3. Insert the following line in the [boot] section:
          system.drv=system.drv
    						
  4. Quit Notepad and save your changes.
  5. Quit and restart Windows.
MicroLogic Technical Support has confirmed that an updated version is required to run MoreFonts correctly with Windows 3.1. The updated version can be obtained by calling MicroLogic. To determine if the updated version of MoreFonts is already installed, choose About from the MoreFonts Control menu; updates have serial numbers of 3051 or higher. For more information, please contact Micrologic Technical Support.

MoreFonts is manufactured by MicroLogic Software, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Modification Type:MajorLast Reviewed:10/10/2003
Keywords:KB92661