How to troubleshoot software updates for the LG LRM-519 DVR/DVD Recorder on a dial-up connection (908729)

MORE INFORMATION

1. Make sure that the telephone line is securely plugged in to the recorder.
2. Make sure that you have not used a splitter on the telephone line between the recorder and the telephone jack.
3. Make sure that the dial-up connection on the recorder is correctly configured. To do this, follow these steps:
   1. Start the recorder.
   2. Select Settings, and then select Phone and Network Setup.
   3. Under Set up Connection, verify that Use Phone line is selected.
   4. Select Configure Phone, and then select the Tone check box.
   5. If you have to dial 9 to reach an outside line, use the numeric keypad on the remote control to enter 9 in the Prefix text box.

      Note To clear an entry, use the arrow keys on the remote control to select the incorrect entry, and then use the keypad to enter the correct number.

   6. Enter your telephone number on the Enter Your Home Phone Number page, and then select Connect.

      Note The recorder will now try to establish a connection with your telephone line.