NE 1000 and NE 2000 Don't Work on IRQ 5 with I/O at 300h (90216)
The information in this article applies to:
- Microsoft Windows 3.1
- Microsoft Windows 3.11
This article was previously published under Q90216
3.10 3.11
WINDOWS
kbnetwork kbprb kbhw
NE 1000 and NE 2000 network cards don't work correctly with Windows
for Workgroups when they are set for interrupt 5 and I/O address 300.
These cards work correctly with Windows for Workgroups if you use any
other setting for interrupt or I/O address. This is documented in the
NE 1000 and NE 2000 manuals.
NOTE: Control Panel allows you to set the card to these two incorrect
settings; therefore, the potential for conflict with Windows for
Workgroups exists.
Modification Type: | Major | Last Reviewed: | 10/12/2003 |
---|
Keywords: | KB90216 |
---|
|