Changes Made to SYSTEM.INI by Sound Master II Board (90190)


The information in this article applies to:

  • Microsoft Windows 3.1
  • Microsoft Windows 3.11
This article was previously published under Q90190

SUMMARY

Sound Master II, manufactured by Covox Tympanum Corporation in Eugene Oregon, emulates an Adlib MIDI card. Windows 3.1 digitized sound drivers for the Sound Master II card are available from the Covox bulletin board service (BBS).

MORE INFORMATION

Installation of the Covox drivers and support files make the following changes to the SYSTEM.INI file. 
   [drivers]
   midi=cvxmidi.drv (MIDI option)
   wave=cvxdma.drv (Waveform option)

   [cvxmidi.drv]
   PORT=330 (MIDI option)
   IRQ=3 (MIDI option)

   [DMAMME.DRV]
   PORT=220 (Waveform option)
   IRQ=7 (Waveform option)
   DMA=1 (Waveform option)

Troubleshooting Tips

If you have problems starting Windows after the Covox DMA Waveform driver is added, you may need to change the jumpers on the Covox Sound board and manually edit the SYSTEM.INI file to reflect the changes you made to the PORT, IRQ, and DMA jumpers.

For more information, contact Covox technical support at the following numbers: 
   Covox technical support: (503) 342-1271
   Covox BBS 2400 BPS       (503) 342-4135
   Covox BBS 14.4K BPS:     (503) 342-8261
The products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:10/12/2003
Keywords:KB90190
©2003 Microsoft Corporation. All rights reserved.