Use Generic/Text Only Driver with HP ThinkJet 2225A (87365)

MORE INFORMATION

The Hewlett-Packard HP-IB ThinkJet and ThinkJet 2225A printers use a proprietary device interface based on the IEEE standard. The HP ThinkJet driver included in the Microsoft Windows versions 3.0 does not work with this printer. Although Windows 3.1 includes a driver for the ThinkJet 2225 C-D, the printer produces poor output if this driver is used with the ThinkJet 2225A.

To make the HP-IB ThinkJet printer to work with Windows 3.0 or 3.1, use the Generic Text-only printer driver and print to the LPTx.DOS or LPTx.OS2 port, or clear the Fast Printing Direct To Port check box in the Control Panel Printer Connect dialog box (in Windows 3.1 only).

Cabling Problems

The most common cause of problems printing to the HP ThinkJet is using a cable that was not specifically designed for the ThinkJet printer.

Because of differences in the way various drivers access the cable, many applications can print successfully to the printer with the wrong cable. However, Windows uses more pin/wires on the cable than most MS-DOS-based applications.

If the ThinkJet cable does not clear up the problems, try booting to a "clean" environment, then try to print again.

For more information, query on the following words in the Microsoft Knowledge Base: The ThinkJet printer is manufactured by Hewlett-Packard, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.