You cannot add or remove Performance Monitor counters (830059)
The information in this article applies to:
- Microsoft Windows 2000 Server
- Microsoft Windows 2000 Advanced Server
- Microsoft Operations Manager 2005, when used with:
- Microsoft Windows 2000 Advanced Server
- Microsoft Windows 2000 Server
SYMPTOMS On a computer that is running EMC Control Center from EMC Corporation,
you may not be able to add or to remove Performance Monitor counters. This
issue may also cause program setup operations to quit prematurely. For example,
when you try to install Microsoft Exchange Server 5.5, you may receive the
following
sequence of error messages: The command lodctr
dsactrs.ini
failed, returning an error code of
<6>. Processing file
'..\SETUP\I386\server.ins', at or near line 153
An internal component
has failed.
Microsoft Exchange Server Setup ID no:c103798a
An internal component has failed.
Microsoft Exchange Server Setup ID no:c103798a Microsoft Exchange Server Setup was Interrupted before your
new software was fully installed. You can run Microsoft Exchange
Server Setup in its entirety at a later time to complete the
installation. Note This issue may also cause the following symptoms: CAUSE This issue occurs when the EMC Master Agent, a component of
EMC Control Center, locks the Perfc009.dat and the Perfh009.dat Performance
Monitor files. This action prevents any other process from writing to these
files. RESOLUTION To resolve this issue, you must prevent the EMC program
from locking the Performance Monitor files before you install any new
Performance Monitor counters or any programs that require access to the
Performance Monitor files. To prevent EMC
Control Center from locking these files, use
one of the following methods:
- Stop the EMC Master Agent.
For additional information, see your EMC Control Center
documentation.
- Prevent the MnrAgent.exe program (a component of EMC Master
Agent) from capturing Performance Monitor data. To do so, follow these steps:
- Open the c:\ECC\exec\ctg.ini file in
Notepad.
- Change the "SleepInterval = 3600" entry to the
following:
- Save and close the file.
- Right-click ctg.ini, and then click
Properties.
- Click to select the Read-only check
box, and then click OK.
- Stop the MnrAgent.exe process. To do so, follow these
steps:
- Click Start, right-click My
Computer, and then click Manage.
- Expand Services and Applications, and
then click Services.
- Right-click EMC Client Service, and
then click Stop.
- Click Start, click
Run, type taskkill /F /IM mnragent.exe,
and then click OK.
Note If stopping the Mnragent.exe process does not resolve the issue, you may need to manually end the Mnragent.exe process. To manually end the Mnragent.exe process, follow these steps:- Press CTRL+ALT+DEL to start the Windows Security dialog box.
- Click Task Manager.
- On the Processes tab, click Mnragent.exe, and then click End Process.
- Quit Windows Task Manager.
MORE INFORMATION
The third-party products that this article discusses are manufactured by
companies that are independent of Microsoft. Microsoft makes no warranty,
implied or otherwise, regarding the performance or reliability of these
products.
Modification Type: | Minor | Last Reviewed: | 5/2/2005 |
---|
Keywords: | kberrmsg kbwinservperf kbMgmtServices kbnofix kbinfo KB830059 kbAudITPRO |
---|
|