HP LaserJet IIISi Printing from Lower Output Bin (72089)


The information in this article applies to:

  • Microsoft Windows 3.0
  • Microsoft Windows 3.0a
  • Microsoft Windows 3.1
  • Microsoft Windows 3.11
This article was previously published under Q72089

SUMMARY

When printing with the Hewlett-Packard (HP) LaserJet IIISi (driver 3.77) using the Lower (rear) Output Bin, the output ejects from this bin and not the Upper Output Bin. This article describes the procedure for changing the Output Bin.

MORE INFORMATION

To have the output eject to the Upper Output Bin:
  1. Select Printers from the Control Panel.
  2. Choose the Configure button.
  3. Choose the Setup button.
  4. If you are using the driver 3.77 (PCLS/HP) for the HP LaserJet IIIsi, an Options button is available. Choose Options.
  5. A dialog box appears for output bin selection. Select Upper under the Output Bin option.
The printer default setting for paper tray selection on the LaserJet IIISi is TRAY=BOTH. The lower bin can be selected from the Control Panel of the printer or through most software applications. Subsequent print jobs continue to output from the lower (rear) bin until you change the settings in the Control Panel.

REFERENCES

"Hewlett-Packard LaserJet IIISi Printer User's Reference Manual," pages 5-5 and 5-8.
Modification Type:MinorLast Reviewed:7/7/2005
Keywords:KB72089
©2004 Microsoft Corporation. All rights reserved.