Everex 1200 and 2400 BPS Modems and Windows Terminal (63585)


The information in this article applies to:

  • Microsoft Windows 3.0
  • Microsoft Windows 3.1
  • Microsoft Windows 3.11
This article was previously published under Q63585

SUMMARY

The Everex 1200 and 2400 bits-per-second (BPS) Modems require adjustments to the Modem Commands section of the Terminal program included with Microsoft Windows.

MORE INFORMATION

To dial properly, you should perform the following steps:
  1. Select Settings.
  2. Choose Modem Commands.
  3. Set Modem Defaults to None.
  4. Set Dial Prefix to ATDT.
  5. Set Hangup Prefix to +++.
  6. Set Hangup Suffix to ATH.
  7. (Windows 3.0 only) Set Answer to ATQ1E0S0=1.
  8. Set Originate to ATQ1.
  9. Choose OK.
Modification Type:MinorLast Reviewed:7/7/2005
Keywords:KB63585
©2004 Microsoft Corporation. All rights reserved.