How to Get 3.5-Inch Disks for QuickBasic for MS-DOS (38957)
This article was previously published under Q38957
SUMMARY
If you already have 5.25-inch disks for a given version of QuickBasic
but wish to obtain the 3.5-inch disks for that version, you need to
contact the Microsoft Information Service at (800) 426-9400 or
Microsoft Customer Service at (206) 882-8088 between 6 AM and 5:30 PM
Pacific time.
The 3.5-inch disks were produced for the following QuickBasic
versions:
2.01
3.00
4.00
4.00b
4.50
When you contact Microsoft Customer Service or the Microsoft
Information Center, you need one of the following:
Registration Card (if you haven't sent it in)
Product Number on the disk
Document Number inside the QuickBasic manuals
If you already have 5.25-inch disks for a given version of QuickBasic
from Version 2.01 through Version 4.50, Microsoft can send you the
3.5-inch disks if available for that same version number. As of
December 1988, there is no charge for this, but you must confirm the
charges and conditions with Microsoft Customer Service.
| Modification Type: |
Minor |
Last Reviewed: |
1/9/2003 |
| Keywords: |
KB38957 |
|