Running ISA Server on Windows Server 2003 (331062)



The information in this article applies to:

  • Microsoft Internet Security and Acceleration Server 2000
  • Microsoft Internet Security and Acceleration Server 2000 SP1
  • Microsoft Windows Server 2003, Enterprise Edition
  • Microsoft Windows Server 2003, Standard Edition
  • Microsoft Windows Server 2003, Datacenter Edition

This article was previously published under Q331062

SUMMARY

The following updates are required for Internet Security and Acceleration (ISA) Server 2000 to function correctly on computers running Windows Server 2003:
  • ISA Server Service Pack 1 (SP1)
  • The ISA Server 2000 Required Updates for Windows Server 2003 package
ISA Server is supported on all versions of Windows Server 2003 except Windows Server 2003, Web Edition.

MORE INFORMATION

If you are already running Windows 2000 Server, install ISA Server and the previous updates before you upgrade the operating system. If you have a clean install of Windows Server 2003 or have already upgraded, follow the directions that appear later in this article.

Upgrading from Servers Running Windows 2000

Microsoft recommends that you install ISA Server, ISA Server SP1, and the ISA Server 2000 Required Updates for Windows Server 2003 package on the Windows 2000-based ISA Server computer before you upgrade to Windows Server 2003.

To upgrade a computer running Windows 2000, follow these steps:
  1. Install ISA Server.
  2. Download and install ISA Server SP1.

    After the installation of SP1 completes, you must restart the computer. For information about how to obtain ISA Server SP1, visit the following Web site:
  3. After the computer restarts, download and install the ISA Server 2000 Required Updates for Windows Server 2003 package.

    For information about how to obtain the ISA Server 2000 Required Updates for Windows Server 2003, view the "ISA Server 2000 Required Updates for Windows Server 2003" section of this article.
  4. Upgrade to Windows Server 2003.

Installing ISA Server on Servers Running Windows Server 2003

You can also install ISA Server after you upgrade to Windows Server 2003. However, the packet filter extension driver in the release version of ISA Server is incompatible with Windows Server 2003, and it is blocked from loading during installation. During installation, you can safely ignore all error messages that are related to this issue because ISA Server SP1 includes a compatibility fix for the driver. After you install ISA Server, the incompatible software services do not start. You must then apply ISA Server SP1 to implement the driver fix. After you install ISA Server SP1, you must install the ISA Server 2000 Required Updates for Windows Server 2003 package.

Before you install ISA Server on a computer running Windows Server 2003, make sure that the computer is disconnected from the Internet. The computer must remain disconnected from the Internet until you successfully complete all the following steps. After that, you can safely connect the computer to the Internet.

Note Do not remove (uninstall) ISA Server before you install ISA Server SP1. If you have to remove ISA Server, you must wait until you have completed your installation of ISA Server SP1.

To install ISA Server on Windows Server 2003, follow these steps:
  1. Start the ISA Server Setup process. You receive the following message:ISA 2000

    ISA 2000 requires Service Pack 1 to function correctly on this version of Windows. During the installation, error messages and error event logs regarding compatibility might appear. These messages may be ignored during the installation. Install Service Pack 1 after this installation is complete. Service Pack 1 can be downloaded from http://go.microsoft.com/fwlink/?linkid=4833.

    For more information, contact Microsoft.
  2. Click Continue. When Setup completes the installation of ISA Server, you receive the following message in the notification area:Devices or applications disabled
    'ISA 2000' will cause Windows to become unstable. Windows has prevented these drivers from loading. Click here for more details.
  3. When Setup is complete, you receive the following message: Setup has failed to start one or more services. Please examine the event log for more details.
  4. Download and install ISA Server SP1. After you install SP1, you must restart the ISA Server computer.
  5. After the computer restarts, download and install the ISA Server 2000 Required Updates for Windows Server 2003 package. To obtain this update, view the "ISA Server 2000 Required Updates for Windows Server 2003" section of this article.
After you install the ISA Server 2000 Required Updates for Windows Server 2003 package, ISA Server functions correctly.

Running ISA Server 120-Day Trial Software on Windows Server 2003

The ISA Server 120-day trial program is currently only supported on Windows 2000-based servers. You must remove the ISA Server trial program from any server running Windows 2000 before you upgrade to Windows Server 2003.

Known Issues That Occur When Running ISA Server on Windows Server 2003

  • When you run ISA Server 2000 and Microsoft Internet Information Services 6.0 (IIS) on the same computer, you may experience issues with the ISA Server Web proxy service (W3proxy). By default, IIS listens on all IP addresses. This prevents W3proxy from binding to port 80 for Web publishing. To resolve this issue, follow these steps:
    1. Install the Windows Server 2003 Support Tools (included with Windows Server 2003), and then locate the Httpcfg.exe file.
    2. Run the Httpcfg.exe utility to configure HTTP.sys to stop listening on all IP addresses. To do this, type httpcfg delete iplisten -i 0.0.0.0 at a command prompt.
    3. Configure HTTP.sys to listen only on the specified IP address (usually the internal IP address of ISA Server) by typing httpcfg set iplisten -i ip-address at a command prompt.
    4. Stop the IIS HTTP service by typing net stop http at a command prompt.
    5. Stop the ISA Server Web proxy service by typing net stop w3proxy at a command prompt.
    6. Restart the IIS HTTP service by typing net start http at a command prompt.
    7. Restart any related IIS services. For example, type net start "World Wide Web Publishing Service".
    8. Restart the ISA Server Web proxy service by typing net start w3proxy at a command prompt.
  • ISA Server digest authentication may not function when it is run with a Windows Server 2003 domain. On the Windows Server 2003 domain controller, you have to register Iissuba.dll. By default, this file is not registered on Windows Server 2003. To resolve this issue, follow these steps:
    1. Start a command prompt.
    2. Type Rundll32 iissuba.dll, RegisterIISSUBA on each Windows Server 2003 domain controller.

      Note This command is case-sensitive.
  • You cannot run the ISA Server Security Configuration Wizard in Dedicated mode unless the computer is a member of a domain.
  • Remote client connections may be unsuccessful when they send requests to ISA Server computers configured as a Network Load Balancing cluster that has a virtual IP address (VIP) on the external interface. This problem occurs if there are multiple VIPs on the internal interface, and if the UseISAAddressInPublishing registry key that is described in the followng Microsoft Knowledge Base article is used:

    311777 How to Enable Translating Client Source Address in Server Publishing

    Traffic sent from the ISA Server internal interface to the published server originates from one of the internal VIPs and not an individual firewall's device IP address. The problem occurs because reply traffic is load-balanced and may be sent to a firewall that does not have a context for the connection. This traffic is dropped and will never return to the remote client. This results in a connection failure.
  • When you install ISA Server, view reports, or read the ISA Server online help, you may receive the following message:Microsoft Internet Explorer's Enhanced Security configuration is currently enabled on your server. This enhanced level of security reduces the risk of attack from Web-based content that is not secure, but it may also prevent Web sites from displaying correctly and restrict access to network resources. To prevent this message from appearing, click to select the In the future, do not show this message check box, and then click OK.

ISA Server 2000 Required Updates for Windows Server 2003

The following file is available for download from the Microsoft Download Center:
DownloadDownload the ISA Server 2000 Required Updates for Windows Server 2003 package now.
Release Date: April 23, 2003

For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:

119591 How to Obtain Microsoft Support Files from Online Services

Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.

The English version of this fix has the file attributes (or later) that are listed in the following table. The dates and times for these files are listed in coordinated universal time (UTC). When you view the file information, it is converted to local time. To find the difference between UTC and local time, use the Time Zone tab in the Date and Time tool in Control Panel.
   Date         Time   Version            Size    File name
   -------------------------------------------------------------
   11-Feb-2003  23:24  3.0.1200.255        8,976  Bwcpmon.dll
   14-Feb-2003  01:41  3.0.1200.255       30,992  Bwserver.dll
   11-Feb-2003  23:24  3.0.1200.255       60,688  Fltrsnk1.dll
   11-Feb-2003  23:24  3.0.1200.255       85,264  H323fltr.dll
   11-Feb-2003  23:24  3.0.1200.255        5,904  Hfperf.dll
   28-Feb-2003  21:23  3.0.1200.255       34,064  Hotfix_res.dll
   16-Feb-2003  19:47  3.0.1200.255        5,904  Hotfix_utl.dll
   11-Feb-2003  23:22  3.0.1200.255    1,821,968  Msfpccom.dll
   11-Feb-2003  23:23  3.0.1200.255    2,570,000  Msfpcsnp.dll
   11-Feb-2003  23:24  3.0.1200.255      178,448  Mspadmin.exe
   11-Feb-2003  23:23  3.0.1200.255       41,296  Mspfltex.sys
   11-Feb-2003  23:23  3.0.1200.255      101,136  Msphlpr.dll
   11-Feb-2003  23:23  3.0.1200.255       16,656  Mspmon.dll
   05-Feb-2003  21:28  3.0.1200.255          501  Os.map
   11-Feb-2003  23:24  3.0.1200.255       34,064  Socksflt.dll
   11-Feb-2003  23:24  3.0.1200.255        6,416  Socksprf.dll
   11-Feb-2003  23:23  3.0.1200.255      390,928  W3proxy.exe
   11-Feb-2003  23:24  3.0.1200.255        6,928  Wspperf.dll
   11-Feb-2003  23:24  3.0.1200.255      298,768  Wspsrv.exe
Note Because of file dependencies, this update requires ISA Server 2000 SP1. For additional information about how to obtain the latest ISA Server 2000 service pack, click the following article number to view the article in the Microsoft Knowledge Base:

313139 How to Obtain the Latest Internet Security and Acceleration Server 2000 Service Pack


Modification Type:MinorLast Reviewed:8/9/2004
Keywords:ATdownload kbinfo kbbug kbfix KB331062 kbAudDeveloper